Manual Candy 2D 964 X (page 11 of 37) (English, German, French, Italian, Spanish)

466043

Zoom out

Zoom in

1/37

10 GB

CLEANING THE OVEN : PYROLYSIS

Pyrolysis is a cleaning method that uses high temperatures to

destroy dirt.

The resulting smoke is cleaned by the passage of a catalyser.

The oven door is provided with a safety lock that prevents it being

opened during pyrolysis due to the necessity of high temperatures.

The pyrolysis cycle may result in a slight odour in the kitchen

which will be more or less noticeable depending on the latter’s

aeration.

IMPORTANT:

Before carrying out pyrolysis:

• Take all accessories out of the oven as they will be damaged

in the high pyrolysis temperatures;

• Clean away all excess food spills or large scraps of food

which would take too long to be destroyed. Effectively, large

amounts of grease may catch fire under the intense heat

emitted by pyrolysis.

• Close the oven door.

. If you have an hob top installed above the oven, never use

the gas burners or the electric plates during pyrolysis to

avoid excessive heating of the oven’s control panel.

. It is strongly advised not to use detergents or any other

recommended product for cleaning ovens.

• Open the oven door.

Pyrolysis leaves a white residue on the oven walls.

Wait for the oven to cool completely then clean the inside of the

oven with a damp sponge to wipe off the residue.

Remarks:

•

you will save energy by cleaning directly after cooking thus

making use of the residual heat in the oven.

•

The cooling fan operates from the start of the pyrolysis.

•

The cooling fan only stops when the oven parts are sufficiently

cooled.

ACTIVATING THE PYROLYSIS CYCLE

1. Leave the thermostat knob in position ‘0’

2. Rotate the function selector to the position P

3. The door is locked

4. Using the programmer set the pyrolysis time

ATTENTION: if a pyrolysis cycle time is not settet the pyrolyses

will not start

• Oven moderately dirty 90 minutes

• Oven normally dirty 105 minutes

• Oven very dirty 120 minutes

5. At the end of the pyrolysis cycle the oven will automatically

switch off.

6. Rotate the function selector to the position ‘0’

The oven temperature will decrease, the door will be unlocked

once the temperature will be under 320°C.

SERVICE CENTRE

Before calling the Service Centre

If the oven is not working, we recommend that:

• you check that the oven is properly plugged into the power

supply.

If the cause of the fault cannot be detected:

disconnect the oven from the mains, do not touch the oven and

call the after sales service.

Before calling the Service Centre remember to make a note of

the serial number on the serial number specifications plate.

The oven is supplied with a guarantee certificate that ensures that

it will be repaired free of charge by the Service Centre whilst

under guarantee.

This appliance is marked according to the

European directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly,

you will help prevent potential negative

consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product.

The symbol on the product indicates that this

product may not be treated as household waste.

Instead it shall be handed over to the applicable collection point

for the recycling of electrical and electronic equipment

Disposal must be carried out in accordance with local

environmental regulations for waste disposal.

For more detailed information about treatment, recovery and

recycling of this product, please contact your local city office,

your household waste disposal service or the shop where you

purchased the product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Candy 2D 964 X in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Candy 2D 964 X Manual

Product: