Manual Candy 2D 964 X (page 9 of 37) (English, German, French, Italian, Spanish)

466043

Zoom out

Zoom in

1/37

GENERAL WARNINGS

8 GB

DECLARATION OF COMPLIANCE

• The parts of this appliance that may come into contact with

foodstuffs comply with the provisions of EEC Directive 89/109.

This appliances complies with Directives 89/336/EEC,

73/23/EEC and following changes.

• Read the instructions carefully to make the most of your oven. We recommend you keep the instructions for installation and use for

later reference, and before installing the oven, note its serial number below in case you need to get help from the after-sales service.

• Identification plate (located on the side of the oven)

The company shall not be liable if the instructions

provided in this document are not complied with.

When you have unpacked the oven, make sure that it has not

been damaged in any way. If you have any doubts at all, do

not use it: contact a professionally qualified person.

Keep packing materials such as plastic bags, polystyrene, or

nails out of the reach of children because they are dangerous

for children.

SAFETY HINTS

• The oven must be used only for the purpose for which it was

designed: it must only be used for cooking food.

Any other use, e.g. as a form of heating, is an improper use

of the oven and is therefore dangerous.

• The manufacturers cannot be held responsible for any damage

caused by improper, incorrect or unreasonable use.

When using any electrical appliance you must follow a

few basic rules.

• All accessible parts are hot when the appliance is in operation,

take care to not touch these elements.

- Do not pull on the power cable to remove the plug from the

socket.

- Do not touch the oven with wet or damp hands or feet.

- Do not use the oven unless you are wearing something on

your feet.

- Do not allow children or irresponsible people to use the oven

unless they are carefully supervised.

- It is not generally a good idea to use adapters, multiple sockets

for several plugs or cable extensions.

- If the oven breaks down or develops a fault switch it off at the

mains and do not touch it.

• If the cable is damaged it must be replaced promptly.

When replacing the cable, follow these instructions.

Remove the power cable and replace it with one of the HO5RR-

F, H05VV-F, H05V2V2-F type. The cable must be able to bear

the electrical current required by the oven. Cable replacement

must be carried out by properly qualified technicians.

The earthing cable (yellow-green) must be 10 mm longer than

the power cable.

Use only an approved service centre for repairs and ensure

that only original parts are used. If the above instructions are

not adhered to the manufacturers cannot guarantee the safety

of the oven.

• The oven you have just acquired has the described technical

characteristics and you must not make any modifications to it.

• Never use a steam or high-pressure spray to clean the oven.

• Do not store flammable products in the oven; they can catch

fire if the oven comes on accidentally.

• Do not press on and do not let children sit on the oven door.

• Use kitchen oven gloves, when putting into or removing a dish

from the oven.

RECOMMENDATIONS

• After each use of the oven, a minimum of cleaning will help

keep the oven perfectly clean.

• Do not line the oven walls with aluminium foil or single-use

protection available from stores. Aluminium foil or any other

protection, in direct contact with the hot enamel, risks melting

and deteriorating the enamel of the insides.

• In order to prevent excessive dirtying of your oven and the

resulting strong smoky smells, we recommend not using the

oven at too high a temperature. It is better to extend the cooking

time and lower the temperature a little.

• In addition to the accessories supplied with the oven, we advise

you only use dishes and baking moulds resistant to very high

temperatures.

INSTALLATION

Installation is the customer’s responsibility. The manufacturers

have no obligation to carry this out. If the assistance of the

manufacturer is required to rectify faults arising from incorrect

installation, this assistance is not covered by the guarantee.

The installation instructions for professionally qualified personnel

must be followed. Incorrect installation may cause harm or injury

to people, animals or belongings. The manufacturer cannot be

held responsible for such harm or injury.

The kitchen unit in which the oven is to be fitted must be made

of material resistant to temperatures of at least 70°C.

The oven can be located high in a column or under a worktop.

Before fixing: you must ensure good ventilation in the oven space

to allow proper circulation of the fresh air required for cooling and

protecting the internal parts. Make the openings specified on last

page according to the type of fitting.

ELECTRICAL CONNECTION

THE ELECTRICAL CONNECTION SHOULD BE CARRIED OUT

BY AN APPROVED CONTRACTOR OR TECHNICIAN WITH

SIMILAR QUALIFICATIONS.

The installation receiving the appliance must comply with the

standard in force in the installation country.

The manufacturer does not accept any responsibility if this provision

is not complied with.

Connection to the network must be by earthed socket outlet, or

by means of a multipole circuit-breaker having a distance between

contacts of at least 3 mm.

The installation must be protected by suitable fuses, and have

wires with a large enough cross-section to supply the oven normally.

CONNECTION:

The oven is fitted with a power lead for connecting exclusively to

a voltage of 230 V AC across the phases or across phase and

neutral.

Connection must be carried out having first checked:

. the supply voltage indicated on the meter,

. the circuit-breaker setting.

The lead protection wire (green/yellow) connected to the earth

terminal of the oven must be connected to the earth terminal of

the installation.

Caution:

. Have the earth continuity of the installation checked by an

electrician before making the connection.

. The manufacturer will not be liable for any incident, or the

possible consequences that may arise from the use of the

oven not earthed, or connected to an earth with defective

continuity.

NB:

Do not forget that the oven may require after-sales service.

Also, locate the socket outlet so that the oven can be connected

once it is removed from its space.

Power supply cable

if the power supply cable has to be changed,

please have this done by the after-sales service or by someone

with similar qualifications.

Made in FRANCE - 232 -

220 - 240 V

P. Motors = 30 W

Mod : FE GD21 RB

P. Maxi (Oven) - 2350 W

Code: 39354774 -0306 0511

Mod: FE GD21 RB

Code: 39354774 - 0306 0511

220 - 240 V

Code: 39354774

- 0306 0511

Code: 39354774

- 0306 0511

Code: 39354774

- 0306 0511

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Candy 2D 964 X in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Candy 2D 964 X Manual

Product: