764907
23
Zoom out
Zoom in
Previous page
1/32
Next page
Owners Manual
22
Diagnostic Messages
MESSAGE
--
HH/OHH
OH/OHH
SA/SnA
Sb/Snb
Sn/SnS
HL/HFL
LF
dr
dry
IC/ICE
EC/ECN
SL/SLP
MEANING
No message on display. Power has been cut off
to spa
Temperature unknown
“Overheat” The spa has shut down. One of
the sensors has detected that the spa water is
110°F/43.3°C or higher.
“Overheat” The spa has shut down. One of
the sensors has detected that the spa water is
110°F/43.3°C
Spa is shut down. The sensor that is plugged
into Sensor “A” jack is not
working.
Spa is shut down. The sensor that is plugged
into Sensor “B” jack is not
working.
Sensors are out of balance. If alternating with
spa temperature, it may be a temporary
condition. If flashing by itself, spa is
shut down.
A significant difference between temperature
sensors has been detected. This could
indicate a flow problem.
Persistent low flow problems. (Display on the
fifth occurrence of HL/HFL message with in
24 hours.). Heater is shut down, but other spa
functions continue to operate.
Possible inadequate water, poor flow or air
bubble detected in the heater. Spa is shut down
for 15 minutes.
Inadequate water detected in heater. (Displays
on third occurrence of dr message). Spa is shut
down.
“Ice” Potential freeze condition detected.
Spa is in Economy Mode
Spa is in Economy Mode
ACTION REQUIRED
The control panel will be disabled until power is
re-established. Based on the spa controller configuration
will return to the Factory Default Settings.
After the Pump has been running for 2 minutes, the current
water temperature will be displayed.
DO NOT ENTER THE WATER.
Remove Spa Cover and allow water to cool. Once the Heater
has cooled, press any button to reset.
If spa does not reset, shut off power to the spa and contact
the dealer.
DO NOT ENTER THE WATER.
Remove spa cover and allow water to cool. At 107°F/41°C,
the spa should automatically reset. If spa does not reset,
shut off power to the spa and
call your dealer.
If problem persists, contact the dealer. (May appear
temporarily in an overheat condition).
If problem persists, contact the dealer. (May appear
temporarily in an overheat condition).
If problem persists, contact the dealer. (May appear
temporarily in an overheat condition).
If the water level is normal, make sure all pumps have been
primed and no Air Lock exists. If problem
persists, contact the dealer.
Follow action required for HL/HFL message. Heating
capability of the spa will not reset automatically;
Press any button to reset.
If the water level is normal, make sure all pumps have been
primed and no Air Lock exists. This message will
reset within 15 minutes. If problem persists, contact the
dealer.
Follow action required for dr message. Spa will not reset
automatically; Press any button to reset.
Please contact your Dealer
See Spa Modes section
See Spa Modes section
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canadian Spa Company Ontario 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canadian Spa Company Ontario 2016 in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info