Manual Camry CR 7929 (page 6 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish)

802432

Zoom out

Zoom in

1/132

C. Temperature / timer down button

Press an air oscillation button (H), after the device turns on, automatic air oscillation function turns on, the louver will swing continuously

the left and the right; by pressing the button again the movement will stop and the louver remain in that position.

Dehumidifying mode –

The radius of horizontal air oscillation is 30 degrees left and 30 degrees right direction from the middle vertical.

- When the device is working, press button “G”, the LCD screen flashes, press the button “C” or “D” to set up the quantity of hours need to

pass before the device will shut off automatically. The LCD screen stops flashing, the timer icon will be illuminated, LCD screen shows

required to achieve temperature. This is a delayed start function.

REMOTE CONTROLLER operation – picture E

The water full indicator lamp “N” will be illuminated and the buzzer will alarm for several second, then the compressor will stop to work when

the inner device water tank will be full.

- Press button “K” to select dehumidifying mode, the LCD screen will show “dh”. Under dehumidifying mode, sleep mode cannot be setup,

and fan speed is fixed on slow fan speed automatically and cannot be changed. In order to switch off the dehumidifying mode select other

operation mode: cooling or fan mode. 13The function of drain plug ( ) is to drain the condensate water from the device's upper part. Its use

is determined according to the local air humidity. It is need to open the drain plug ( ) and pour out the condensate water if the device 13

operates when local air humidity is high or the device operates on dehumidification mode continuously for 12-24 hours continuously. In dry

cooling mode (low air humidity) it is not necessary to open the drain plug ( ) because there is no need to drain the condensate.13

- Press button “J” to select cooling mode, next press the button “L” to get slow fan speed button or press the button “M” to get fast fan

speed button. Next press button “ C” or “ D” to adjust required temperature from 16℃ to 31℃, buttons are not available in fan or

dehumidifying mode.

Timer set up -

Timer operation range can be fixed by each one hour from 1 to 24 hours.

- When the device is not working, press button “G”, the LCD screen flashes, press the button “C” or “D” to set up the quantity of hours after

the device will start to operate. The LCD screen stops flashing and timer icon will be illuminated.

Water full -

- The sleep mode is automatically programmed. After the first hour of operation, the temperature will increase by 1 ℃, after the second hour

of operation, the temperature will increase by another 1 ℃, and then remain at the same level.

Cooling mode -

Fan mode -

- Press button “E” again to cancel sleep mode.

Sleep mode –

- Next press button “ C” or “ D” to adjust required temperature from 16℃ to 31℃.

- At first Press button “J” to cooling mode, next press button “E” to turn on the sleep mode, then the device will work on Energy-Saving and

quiet type.

NOTE: Sleep mode is not available in dehumidify and fan modes.

- Press button “F” to select fan mode, the LCD screen will show “FA”, next press the button “L” to get slow fan speed button or press the

button “M” to get fast fan speed button. During fan mode operation the temperature and sleeping functions cannot be setup.

Automatic air oscillation function –

Press button “A” to turn on and turn off the device, the buzzer will play signal once.

MODE SELECTION on manual operation of control panel –

G. Timer button

When the device is power on, choose mode you need between cooling mode or fan mode or dehumidifying mode as below:

CONTROL PANEL manual operation – picture D

E. Sleep mode button

F. Fan speed selection button

D. Temperature / timer up button

H. Air oscillation button

When the is powered on for the first time, the buzzer will shout, and then the device will get into standby status.

Button "B" - press it to select operation mode: cool mode → dry mode → fan mode.

Button "A" - the device will be started when it is energized or will be stopped, if you press this button again.

The remote controller transmits signals to the system.

Button "C" / "D" - press to set up the operation time from 1 to 24 hours or required room temperature from 15 to 31°C when cooling mode is

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 7929 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 5.92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Camry CR 7929 Manual

Product: