Manual Campingaz CR 5000 Turbo (page 8 of 71) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

662399

Zoom out

Zoom in

1/71

Thank you for choosing this Campingaz

catalytic

heater.

This operating handbook is common to the following

appliances:

CR 5000

CR 5000 Thermo

CR 5000 Turbo

A - GENERAL SAFETY INSTRUCTIONS

This appliance must be used and serviced in accordance

with the regulations and standards in force.

- Please read this handbook before using your

appliance.

-This appliance should not be used in high rise flats,

in basements, bathrooms or bedrooms.

- Only use this appliance in a well ventilated room.

- This appliance should not be used in leisure

vehicles such as caravans and camping-cars.

- This appliance should not be installed in the vicinity

of walls, pieces of furniture, hangings, curtains,

bedding items and other inflammable materials. To

prevent fire hazards, it is strictly forbidden to cover

the appliance.

- This appliance should always be directed to the

centre of the room.

- Do not use your heater less than 50 cm from a wall

or combustible object.

- Do not cover or block the holes of the air intake

positioned at the bottom, front or top of the appliance.

- Do not use the appliance without having fitted the

wheels. The use of the device without wheels can

be dangerous for people.

- The gas hose should be replaced when the expiry

date is passed or whenever it is damaged or

develops surface cracks.

B - ASSEMBLING THE WHEELS

It is compulsory to fit the 4 wheels on the bottom

of the device before using the appliance. Use a

spanner 13 (see fig. 1).

C - SETTING TO SERVICE

IMPORTANT

This operating handbook is intended for enabling

you to correctly and safely use your Campingaz

appliance.

Refer to the handbook to familiarise yourself with

the appliance before connecting the gas bottle.

Comply with this operating handbook instructions.

This appliance must be connected using a pressure

reducing valve and a hose. Call your vendor.

Non conformance with these instructions may be

dangerous for the user and his environment.

Permanently keep this handbook in a safe place so

as to refer to it when needed.

This appliance is preset in factory to operate with

butane using appropriate pressure reducing valve

and hose.

In operation, this appliance must be held away from

inflammable materials.

Do not use a leaking, malfunctioning or damaged

appliance. Return it to your vendor who will give

you the address of the nearest dealer.

This appliance should never be modified nor used

in applications for which it is not designed.

C - 1 - Ventilating the room:

This appliance is a catalytic combustion heater

designed to be used in a sufficiently ventilated room.

A suitable ventilation makes it possible to exhaust

combustion residues and renew the combustion air.

The appliance should not be installed in a room the

volume of which is less than 61 m

for living-rooms and

30.5 m

for other rooms.

Air renewal ventilation area should not be less than

77 cm² evenly distributed between room upper and

lower levels.

A safety device will shut off the gas, thus extinguishing

the appliance if normal ventilation conditions are not

met.

C - 2 - Gas bottle and pressure reducing valve:

This appliance is designed to operate with 11 Kg

to 15 Kg Butane or Propane gas bottles fitted with

an adequate pressure reducing valve (See Gas and

operating pressures page 3).

Only use the type of gas stipulated by the manufacturer.

In France, Belgium, Great Britain and Ireland it

is strictly forbidden to use another gas type than

Butane.

To install the pressure reducing valve, follow pressure

reducing valve operating handbook instructions.

To connect or replace the bottle, always operate in a

well-ventilated place, never in presence of a flame,

spark or heat source.

C - 3 - Gas hose:

France:

The appliance must be used with a hose fitted with a G

1/2 threaded nut to be screwed to the appliance and an

M 20x1.5 threaded nut to be screwed to the pressure

reducing valve (XP D 36-112 Standard).

The hose shall be 0.50 m long. It shall be replaced if

it appears to be damaged or cracked. Do not pull or

twist the hose. Keep it away from parts that are likely

to get heated.

Hose installation, G 1/2 and M 20x1.5 nuts (XP

D 36-112 Standard) (See Fig. 2 and 3):

- Check tightness in compliance with indications of

paragraph D-2.

Switzerland, Germany, Austria:

This appliance must be used with a DIN hose the

quality of which shall comply with the use of butane or

propane gas.

The hose shall be 0.50 m long. It shall be replaced if

it appears to be damaged or cracked. Do not pull or

twist the hose. Keep it away from parts that are likely

to get heated.

Connecting the hose: to connect the hose to appliance

inlet union, firmly but moderately tighten the hose using

2 suitable spanners:

- 14 mm spanner to tighten appliance inlet union.

- 17 mm spanner to screw in hose nut.

Connect the other end to pressure reducing valve

outlet union.

- Check tightness in compliance with indications of

paragraph D-2.

Other countries:

The appliance is fitted with a ringed end-piece. Il must

be used with a hose the quality of which shall comply

with the use of butane or propane gas and with the

M 20x1,5

Pressure

reducing valve

Appliance

black

G 1/2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Campingaz CR 5000 Turbo in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Campingaz CR 5000 Turbo Manual

Product: