810680

Camina-Schmid Neo Line 6554 Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
10
5. Fire protection
5.1 Floor protection in the area in
front of the combustion cham-
ber opening
Before the combustion chamber opening, floors
made of flammable building materials must be
protected by a covering made of non-combusti-
ble building materials. The pad must extend for
at least 500 mm to the front and at least 300
mm to the side beyond the front plate (Fig. 3).
mmmin. 300 mm
1
2
min. 500 mm
min. 300
Fig. 3: Floor protection in the area in front of the combustion chamber
opening
1 = Stove insert,
2 = Cover made of non-combustible building materials
with arched front
5.2 Components made of com-
bustible building materials or
combustible components and
fitted furniture in the vicinity
of stoves
From the combustion chamber opening, at
least 800 mm clearance to components made
of flammable building materials or combusti-
ble components as well as to built-in furniture
must be maintained to the front, to the top and
to the sides; when arranging a radiation protec-
tion ventilated on both sides, a distance of 400
mm is suicient.The ventilated distance must
be at least 20 mm (Fig. 4).
Kaminanlage
1
Fig. 4: Protection of combustible components in the radiation area of the
combustion chamber opening
1 = Stove insert, 2 = Cover made of non-combustible building materials
3 = Component made of combustible building materials, furniture, room
textiles, 4 = ventilated radiation protection
with arched front
From the free outer surfaces of the cladding to
the installation room, a distance of at least
50 mm from combustible building materials
(Fig. 5) or combustible components and to
built-in furniture must be maintained.
1
2
3
Fig. 5: Example, protection and distances for active surfaces
1 = Heating insert
2 = Cover made of non-combustible building materials
3 = Component made of combustible building materials, furniture, room
textiles
Heat accumulation must be avoided, the air
flow must be able to circulate freely.
The outlet points for hot air shall be arranged so
that, within a lateral distance of 300 mm up to
a height of 500 mm above the exit points, there
are no components with flammable building
materials, no such cladding and no built-in fur-
niture (Fig. 5 ).
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camina-Schmid Neo Line 6554 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camina-Schmid Neo Line 6554 in the language / languages: English as an attachment in your email.

The manual is 3.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Camina-Schmid Neo Line 6554

Camina-Schmid Neo Line 6554 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info