590633

Camille Bauer SINEAX CAM mobile Manual

10
Zoom out
Zoom in
Previous page
1/66
Next page
10/66 Device handbook CAM mobile, 06/2014
4.3.3 Defining events to monitor
To detect and record the occurrence of special situation, such as overload or phase failure, limit values can be
defined. The state of a limit or a combination of multiple limit states can then in the logic module be classified
as event or alarm. So each changing can be recorded in the appropriate event lists with the time-stamp of its
occurrence. Up to 64 limit values and up to 32 logic functions (events to monitor) may be defined.
Example: Monitoring an overload situation
In the register „limit values“ for each active phase power a limit value is defined. For each limit you have define
the values limit for ON state and limit for OFF state.
Limit for OFF state
Limit state
0
1
Limit for ON state
Depending on the application limit values are used to monitor if a value is exceeded (upper limit) or falls below
a certain limit (lower limit). The limit for ON state always corresponds to the measurement where the limit state
changes to „1“, the limit for OFF state is the measurement for which the state changes back to “0”. The
difference of the two values corresponds to the hysteresis.
In the „logic module“ the states of the three monitored phase powers will be defined as input for the logic
function LS <1> and combined using a logical „OR“. If one of the three limit values is exceeded, the logic output
becomes „1“. This way a list entry “overload” into the event list is initiated. As soon as the logic output goes
back to „0“ the text “load o.k.“ will be written into the event list.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camille Bauer SINEAX CAM mobile at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camille Bauer SINEAX CAM mobile in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info