750733
12
Zoom out
Zoom in
Previous page
1/26
Next page
8
CREATIVE
MULTI SPEAKER SURROUND
DTT 3500 DIGITAL
MUSIC MOVIE FOURPOINT
DOLBY
DIGITAL
DOLBY SURROUND AUDIO MODE SPEAKER TEST MUTE
LL RR
MASTER CENTER SUBWOOFER SURROUND
PRO LOGIC
ANALOG IN
DIGITAL IN
POWER
STEREO
Decoder Amplifier
Placement
R
Making Connections
Consult the Wiring Diagram on
the next page before making any
connections.
Speaker Connections. Insert one
satellite’s plug into the corre-
sponding Speaker Output on the
Decoder Amplifier. Repeat this
process for the remaining
satellites and subwoofer. If
substituting a powered
subwoofer, connect it to the
SUBWOOFER LINE OUT.
Signal Connections.
Dolby Digital. Connect the Dolby
Digital/SPDIF output of your
signal source to the Decoder
Amplifier’s Dolby Digital input
using the cable with the RCA
plugs at each end.
For Sound Blaster Live! sound
cards with a digital I/O card:
Connect its Digital DIN output to
the Digital DIN input with the
supplied Digital DIN cable (the
one with the red plugs at each
end). It is not necessary to
connect a cable to the Line In and
Rear In input in this instance.
Refer to Connection to Sound
Blaster Live! via Digital DIN
(next page) for more information
about this connection.
For all other sound cards: Use
the tandem audio signal cable.
Connect the green stereo
miniplugs to the Line Out
minijack output of your sound
card and to the Line In minijack
output of the Decoder Amplifier.
Connect the black stereo
miniplugs to the Rear Out
minijack output of your sound
card (if present) and to the Rear
In minijack input of the Decoder
Amplifier.)
Power Supply Adapter Connec-
tions. Confirm the power switch
is in the “OFF” position. Insert
the power supply’s AC plug into
an appropriate receptacle. Insert
the small DC connector into the
“15V DC IN” receptacle on the
back of the Decoder Amplifier.
The Decoder Amplifier can be
placed on the desktop, a shelf or
any site that makes the controls
convenient (see Diagram R).
The Power Adapter cord must be
able to reach from the Decoder
Amplifier back panel to your AC
power receptacle.
Place the Decoder Amplifier on a
hard, flat surface.
There are ventilation slots on the
bottom and top of the Decoder
Amplifier’s enclosure. Don’t block
the ventilation slots by placing
material on top of or below the
Decoder Amplifier.
0420000547 REV. B SINGLE 2/9/01, 1:50 PM12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge SoundWorks Desktop Theater 5.1 DTT2500 Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge SoundWorks Desktop Theater 5.1 DTT2500 Digital in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info