750733

Cambridge SoundWorks Desktop Theater 5.1 DTT2500 Digital Manual

9
Zoom out
Zoom in
Previous page
1/26
Next page
5
The rear satellites may be
installed on their convenient floor
stands. While listening, the stands
should be positioned to the left and
right of your listening position (see
Diagram G on the previous page).
The Floor Stands are small
enough to be stowed underneath a
desk when not in use. See page 7
for floor stand assembly instruc-
tions.
Larger work surfaces can
accommodate both front and
surround pairs of satellites on
their Desktop Stands. Try the
extreme corners of a desk using
the Desktop Stands (see Diagram H).
Also, you may attach the rear
satellites under a desktop or at the
sides of a desk using the hook and
loop fasteners (see Diagram I).
After you have positioned the
rear satellites, use the test sound
to make sure each speaker can be
heard clearly.
The Subwoofer. The subwoofer’s
optimum position is on the floor
against the wall under the
computer desk. The nearer the
subwoofer is to the corner of the
room, the stronger its maximum
bass output will be. We strongly
recommend placing the subwoofer
on the floor (see Diagram J).
Leave at least 8 cm (3 inches) of
space between the subwoofer face
and a wall. Small objects in front
of, but not touching the subwoofer
(table legs, for instance) will have
no effect on its sound. If you have
no available floor space, the
subwoofer can be placed on a
shelf, desktop or other sites, but its
maximum output will be reduced.
The subwoofer is not magnetically
shielded, so position it at least 18
HIJ
inches away from a computer
monitor.
Substituting a powered
subwoofer. You may substitute a
powered subwoofer for the
subwoofer that comes with the
DTT2500 Digital. Connect its line
level input (typically an RCA jack)
to the dedicated subwoofer output
on the back of the Decoder
Amplifier, using a shielded audio
cable with RCA plugs on each end.
Refer to the powered subwoofer’s
User Manual for adjustment
procedures.
0420000547 REV. B SINGLE 2/9/01, 1:50 PM9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge SoundWorks Desktop Theater 5.1 DTT2500 Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge SoundWorks Desktop Theater 5.1 DTT2500 Digital in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info