Manual Cambridge Audio CXR200 (page 11 of 17) (English)

656751

Zoom out

Zoom in

1/17

CXR120/200

ENGLISH

Note: Dolby Digital and DTS formats can sometimes carry less channels

than their maximum such as Dolby Digital (2/0) which means a Dolby Digital

encoded signal which is actually only carrying a two channel stereo signal

(other channels inactive).

Known also as DTS (3/2) or DTS 5.1, DTS provides (up to) 5.1 output from

suitable encoded DTS material, with 5 main channels (Front Left, Front Right,

Centre, Surround Left, Surround Right) and a Low Frequency Eects Channel

for the subwoofer, all discretely encoded. Decoding DTS requires a suitably

encoded DTS disc and a digital connection from the source equipment to

the CXR.

Known also as Dolby Digital (3/3) or Dolby Digital 6.1, an enhanced form of

Dolby Digital. On top of the discretely encoded 5.1 channels Dolby Digital EX

provides an extra 6th channel (Surround Back, giving 6.1) matrix encoded into

the rear surrounds for greater image depth and more solid sound localisation

behind the listener. Dolby Digital EX requires a Dolby Digital EX encoded disc.

Dolby Digital EX is backwards compatible with Dolby Digital 5.1 decoding. If

Dolby Digital EX is decoded as normal Dolby Digital the Surround Back signal

will be present in both Left and Right Rear Surrounds (forming a phantom rear

centre). It can also be decoded as 7.1 by sending the Surround Back decode

to both the Surround Back Left and Right speakers (forming two mono Back

Surrounds).

Known also as DTS (3/3) Matrix, an enhanced form of DTS. On top of the

discretely encoded 5.1 channels DTS ES also provides an extra 6th channel

(Surround Back giving 6.1), matrix encoded into the rear surrounds for greater

image depth and more solid sound localisation behind the listener. DTS ES

requires a DTS ES encoded disc. DTS ES material is backwards compatible

with DTS 5.1 decoding. If DTS ES is decoded as normal DTS the Surround

Back signal will be present in both Left and Right Rear Surrounds (forming a

phantom rear centre). It can also be decoded as 7.1 by sending the Surround

Back decode to the both the Surround Back Left and Right speakers (forming

two mono Back Surrounds).

Another enhanced form of DTS, also known as DTS (3/3) Discrete or DTS

ES Discrete 6.1. DTS ES Discrete also provides an extra channel (Surround

Back) for greater image depth and more solid sound localisation behind the

listener, however in this case extra data is included in the bitstream so that all

channels are discretely encoded. The Surround Back has greater separation

from the other channels than is possible with matrix encoded technologies.

DTS-ES Discrete requires a DTS-ES Discrete encoded disc.

DTS ES Discrete is backwards compatible with both DTS 5.1 and DTS

ES Matrix 6.1 decoding. If DTS ES Discrete is decoded as normal DTS the

Surround Back signal will be present in both Left and Right Rear Surrounds

(forming a phantom rear centre). If DTS ES Discrete is decoded with DTS ES

Matrix the Surround Back signal will be decoded separately (i.e. as 6.1) but by

a matrix process, which will give the same channel separation as if the source

disc were actually DTS ES Matrix (but not as good as DTS EX Discrete).

It can also be decoded as 7.1 by sending the Surround Back decode to

both the Surround Back Left and Right speakers (forming two mono Back

Surrounds).

The replacement for the original Dolby Pro Logic, Dolby Pro Logic II is a

technology where 5 channels (Front Left, Front Right, Centre, Surround

Left, Surround Right) are encoded into a Stereo mix by an analogue matrix

process. Dolby Pro Logic II material can be played back by normal Stereo

equipment (as Stereo) or decoded into 5 channel surround-sound.

Dolby Pro Logic II is compatible with the earlier 4 channel (Left, Centre,

Right and mono Surround) Dolby Pro Logic system (which was the decoding

counterpart to Dolby Surround encoding) as used widely on Video tapes, TV

broadcasts and earlier lms.

Note: Dolby Pro Logic does not include a Low Frequency Eects channel for

the Subwoofer, but the CXR can create a Subwoofer output (for 5.1) via Bass

management. Refer to the 'Speaker Setup' section of this manual.

A newer version of Dolby Pro Logic II which is able to recreate 7 discrete

surround sound channels from suitable encoded stereo source material.

Dolby Pro Logic IIx also has modes for post processing either Stereo material

or 5.1 material into 7 channels whether or not it has been Dolby Pro Logic

IIx encoded. When 5.1 decoding is required, Dolby Pro Logic II decoding will

always be used by the CXR in place of Dolby Pro Logic IIx as IIx only works

for 7 channel output.

Note: Dolby Pro Logic IIx does not include a Low Frequency Eects channel

for the Subwoofer, but the CXR can create a Subwoofer output (for 7.1) via

Bass management. Refer to the 'Speaker Setup' section of this manual.

A new Dolby matrix technology that delivers additional height channels

positioned above the front left and right speakers. Dolby Pro Logic IIz

identies spatial cues that occur naturally in most content plus ambient sound

and amorphous eects such as rain or wind and directs them to additional

front height speakers.

Movie and game producers can also mix specic additional height channels

into a 2ch, 5.1 or 7.1 soundtrack, which Dolby Pro Logic IIz will then decode

as a post process.

If it is desired to use Dolby Pro Logic IIz, you should set the CXR to 5.1

+ Height mode, connect two speakers to the SBL and SBR outputs and

physically position them above your left and right front speakers, then select

Dolby Pro Logic IIz post processing. See later section.

A DTS technology which is able to recreate 6 channel (Left Front, Right Front,

Centre, Left Surround, Right Surround, Surround Back ) surround sound from

suitable analogue matrix encoded stereo source material. DTS Neo:6 material

can be played back by normal Stereo equipment (as Stereo) or decoded into

7.1 by sending the Surround Back decode to the both the Surround Back Left

and Right speakers (forming two mono Back Surrounds).

Note: Neo:6 does not include a Low Frequency Eects channel for

the Subwoofer, but the CXR can create a Subwoofer output via Bass

management. Refer to the 'Speaker Setup' section of this manual.

A DTS technology that provides 5.1 channels of 96kHz / 24bit audio (along

with video if required) on DVD-Video and DVD-Audio (video zone) discs (when

suitably encoded in DTS 96/24). DVD players which allow 'DTS digital out'

pass the DTS 96/24 bitstream over S/P DIF or HDMI for decoding in the CXR.

DSP modes

Stereo/Stereo + Sub

These modes allow you to choose between conventional stereo left and right

speakers or stereo speakers with subwoofer.

Direct

Analogue and digital inputs will bypass any DSP, Bass/Treble controls and

multichannel post processing.

All channels

A stereo input will be mapped to all speakers, with left speakers receiving left

stereo and right speakers receiving right stereo. The center and sub will be

sent a mono signal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio CXR200 in the language / languages: English as an attachment in your email.

The manual is 6,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio CXR200

Cambridge Audio CXR200 User Manual - German - 17 pages

Cambridge Audio CXR200 User Manual - Dutch - 17 pages

Cambridge Audio CXR200 User Manual - French - 17 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cambridge Audio CXR200 Manual

Product: