656751
16
Zoom out
Zoom in
Previous page
1/17
Next page
16
DTS-HD speaker re-map
When playing back a DTS-HD track the CXR can electronically reposition
your speakers to match the setup used in the original recording studio. This
is done automatically in most cases, but for 7.1 setups you will need to
choose either option 1 or 5 – whichever most closely resembles your actual
speaker layout.
Conguration 1 7.1 channel: L, C, R, LFE, Ls, Rs, Lsr, Rsr
Center
Right (30°)
Left (30°)
Left Surround (110°)
Left Surround Rear
(150°)
Right Surround Rear
(150°)
Right Surround
(110°)
LFE
Conguration 5 7.1 channel: L, C, R, LFE, Lss, Rss, Lsr, Rsr
Center
Right (30°)
Left (30°)
Left Surround Side
(90°)
Left Surround Rear
(150°)
Right Surround Rear
(150°)
Right Surround
Side (90°)
LFE
Trigger outputs
The outputs are 0V for O and 12V for On at up to 100mA. The connections
are 3.5mm mono mini-jacks, with the tip as the output, ring as ground.
The options are:
Manual Select: Trigger output is toggled On/O by the matching Trigger
button on the remote control.
Follow Standby: The trigger output will follow the On/O status of the unit.
Sources: – The trigger output is linked to a specic source.
SW version
All 4 software version numbers need to be stated when contacting Cambridge
Audio customer support.
Update via USB
The CXR software can be updated from the front panel USB socket, which
would normally only be required by a service department or where a network
is not available. Normally user updates will be via a network connection.
Save current settings
Saves settings to internal memory. If the current settings have not been
saved, it is advisable to save the current settings before a software update
is performed.
Load saved settings
Loads the stored settings.
Factory reset
After a factory reset any saved settings can be restored if desired.
Network software update
The CXR can be updated via the StreamMagic module connected to the
internet. Updates of the StreamMagic module itself can only be started from
the Cambridge Connect app or the Web administration interface.
Note: A full update can take over 45 minutes to complete.
Web administration interface
This interface allows the user to:
- Customise the name displayed in the Players list in the Cambridge Connect
app and in the Spotify Connect device list.
- Setup the wireless network connection.
- Upgrade the CXR's rmware.
Wired connection
Connect the CXR to a wired network and nd the IP address in the 'CXR
Setup Menu'.
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Connection Information
Network Selection
IP Adress
Subnet Mask
Gateway
DNS1
Ethernet
192.168.0.127
0.0.0.0
0.0.0.0
0.0.0.0
Next Page
Use a web browser on the same network to connect to the CXR IP address,
eg http://192.168.0.127/
Wireless connection
Plug in the supplied wireless antenna to the USB socket on the rear of the
CXR.
Go to your computer/tablet and click on the Wi-Fi/network logo and select
CXR.
Use a web browser on your device to connect to http://10.10.10.10/
HDMI output setup cont.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio CXR200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio CXR200 in the language / languages: English as an attachment in your email.

The manual is 6,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio CXR200

Cambridge Audio CXR200 User Manual - German - 17 pages

Cambridge Audio CXR200 User Manual - Dutch - 17 pages

Cambridge Audio CXR200 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info