Le 840W dispose de raccordements de sortie équilibrés (XLR) et non équilibrés (RCA/Phono). Pour obtenir la meilleure qualité, nous vous conseillons
d’utiliser la sortie équilibrée avec les préamplificateurs qui disposent de cette fonction (comme notre modèle 840E).
Avant d’effectuer les liaisons avec les haut-parleurs, s’assurer que le courant est coupé et utiliser uniquement les interconnections prévues à cet effet
(fiches bananes). S’assurer également que les raccordements avec le pôle (+) et le pôle (-) sont corrects. Votre haut-parleur peut disposer de plus d’une
paire de terminaux de raccordements : BF (basse fréquence) et HF (haute fréquence). Pour le câblage simple, il est conseillé d’utiliser les terminaux BF
pour les liaisons. La bande en métal raccordant les terminaux basse fréquence aux terminaux haute fréquence ne doivent pas être retirées (à retirer
uniquement pour un système de bi-câblage).
840Wazur
27
FRANÇAIS
840E
840W
Raccordements stéréo équilibrés
Le schéma ci-dessous montre la connexion du 840W au 840E en
utilisant des entrées audio équilibrées via des connecteurs XLR 3 pin,
avec un câblage simple à une paire de haut-parleurs.
Lorsque vous utilisez des raccordements équilibrés (XLR), les
commutateurs de type des entrées gauche et droite du 840 W doivent
être sur la position ‘équilibrés’.
Important :Dans cette configuration, le 840W doit être défini en mode
Stéréo.
OnOff
Loop OutputInput
Balanced Audio - RightUnbalanced
Audio - Right
Input
Loop Output
Input
Loop Output
Out
Control Bus
Trigger
IR Emitter
In
Out/Thru
In
In
Loop OutputInput
Balanced Audio - LeftUnbalanced
Audio - Left
azur 840W Class XDTM Power Amplifier
Power Rating: 220 - 230V AC ~ 50/60Hz
Max Power Consumption: 2400W
www.cambridge-audio.com
Designed in London, England
Power AC
Please ensure that loudspeaker terminals are fully tightened
Veuillez s'assurer que les bornes de l'enceinte sont entièrement serrées
Stereo
Mono
Bi-Amp
Bridged
Loudspeaker Terminals - Right
Impedance 4 - 8 ohms
Bridged
Bridged
only!
Please ensure that loudspeaker terminals are fully tightened
Veuillez s'assurer que les bornes de l'enceinte sont entièrement serrées
Loudspeaker Terminals - Left
Impedance 4 - 8 ohms
Bridged
only!
Manufactured in an ISO9001 approved facility
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference
2) This device must accept any interference, including interference that may cause undesired operation
Rec Out 2Rec Out 1Rec InInput 7Input 6Input 5Input 4Input 3Input 2Input 1
(Unbalanced)(Unbalanced)
Pre Out
Pre OutLeftRight
Balanced Pre Out
LeftRight
RS232C
Control Bus
PSU
In
International Patent Pending
LeisureTech Electronics Pty Ltd
GND
Power AC
OnOff
Power
azur 840E Pre-Amplifier
Power Rating: 220 - 230V AC ~ 50/60Hz
Max Power Consumption: 36W
Designed in London, England
Flat / 200Hz L.P.
Manufactured
in an ISO9001
approved facilityThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; 2) This device must accept any interference, including interference that may cause undesired operation.
Input 2 Balanced Audio
Balanced
Unbalanced
Balanced
Unbalanced
Input 1 Balanced Audio
Input 1
Input 2
GND
CAUTION
Risk of electric
shock.
Do not open.
AVIS
Risque de choc
electrique.
Ne pas ouvrir.
ACHTUNG
Vorm öffnen
des gerätes.
Netzstecker ziehen.
R
L
www.cambridge-audio.com
840E
840W
Raccordements stéréo non équilibrés
Le schéma ci-dessous montre la connexion du 840W au 840E en
utilisant des entrées audio non équilibrées via des connecteurs
RCA/phono, avec un câblage simple à une paire de haut-parleurs.
Lorsque vous utilisez des raccordements non équilibrés (Phono/RCA),
les commutateurs de type des entrées gauche et droite sur le 840 W
doivent être sur la position ‘non équilibrés’.
Important :Dans cette configuration, le 840W doit être défini en mode
Stéréo.
OnOff
Loop OutputInput
Balanced Audio - RightUnbalanced
Audio - Right
Input
Loop Output
Input
Loop Output
Out
Control Bus
Trigger
IR Emitter
In
Out/Thru
In
In
Loop OutputInput
Balanced Audio - LeftUnbalanced
Audio - Left
azur 840W Class XDTM Power Amplifier
Power Rating: 220 - 230V AC ~ 50/60Hz
Max Power Consumption: 2400W
www.cambridge-audio.com
Designed in London, England
Power AC
Please ensure that loudspeaker terminals are fully tightened
Veuillez s'assurer que les bornes de l'enceinte sont entièrement serrées
Stereo
Mono
Bi-Amp
Bridged
Loudspeaker Terminals - Right
Impedance 4 - 8 ohms
Bridged
Bridged
only!
Please ensure that loudspeaker terminals are fully tightened
Veuillez s'assurer que les bornes de l'enceinte sont entièrement serrées
Loudspeaker Terminals - Left
Impedance 4 - 8 ohms
Bridged
only!
Manufactured in an ISO9001 approved facility
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference
2) This device must accept any interference, including interference that may cause undesired operation
Rec Out 2Rec Out 1Rec InInput 7Input 6Input 5Input 4Input 3Input 2Input 1
(Unbalanced)(Unbalanced)
Pre Out
Pre OutLeftRight
Balanced Pre Out
LeftRight
RS232C
Control Bus
PSU
In
International Patent Pending
LeisureTech Electronics Pty Ltd
GND
Power AC
OnOff
Power
azur 840E Pre-Amplifier
Power Rating: 220 - 230V AC ~ 50/60Hz
Max Power Consumption: 36W
Designed in London, England
Flat / 200Hz L.P.
Manufactured
in an ISO9001
approved facilityThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; 2) This device must accept any interference, including interference that may cause undesired operation.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Cambridge Audio Azur 840W at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Cambridge Audio Azur 840W in the language / languages: French as an attachment in your email.
The manual is 2,02 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
