6
CD
Connect the audio signal from a Compact Disc player to these sockets.
Alternatively, any line level audio signal may be connected here.
Tuner
Connect the audio signal cable from a radio tuner to this pair of sockets.
These inputs are for analog audio signals only. They should not be
connected to the digital output of a CD player or any other digital device.
Pre-outs
Connect these sockets to the inputs on your P Series Power Amplifier(s).
Please refer to the Connecting Diagrams for details.
Loudspeaker connections
Connect the wires from your left channel loudspeaker to the LEFT + & -
terminals, and likewise the wires from the right channel loudspeaker to
the RIGHT + & - terminals. In each case the red terminal is the positive
output, and the black terminal is the negative input. Care should be
taken to ensure no stray strands of wire are shorting speaker outputs
together. Please ensure that the speaker terminals have been tightened
adequately to provide a good electrical connection. It is possible for the
sound quality to be affected if the screw terminals are loose.
AC power socket
Once you have completed all connections to the amplifier, plug the AC
Power Cable into an appropriate mains socket. The amplifier is now
ready for use.
P SERIES (POWER AMPLIFIERS)
Input/Output
Connect either of these pairs of sockets to the PRE-OUT sockets on your
A-Series (where featured) or C-Series amplifiers. The second set of
sockets can be used to connect a further power amplifier. Please refer
to the Connecting Diagrams for details. These sockets are wired in
parallel so either can be used for input or output.
Loudspeaker connections
Connect the wires from your left channel loudspeaker to the LEFT + & -
terminals, and likewise the wires from the right channel loudspeaker to
the RIGHT + & - terminals. In each case the red terminal is the positive
output, and the black terminal is the negative input. Care should be
taken to ensure no stray strands of wire are shorting speaker outputs
together. Please ensure that the speaker terminals have been tightened
adequately to provide a good electrical connection. It is possible for the
sound quality to be affected if the screw terminals are loose.
AC power socket
Once you have completed all connections to the amplifier, plug the AC
Power Cable into an appropriate mains socket. The amplifier is now
ready for use.