763775
5
Zoom out
Zoom in
Previous page
1/15
Next page
Amplifiers
5
Please take a moment to read these notes before installing your
amplifier, they will enable you to get the best performance and prolong
the life of the product.
This unit should be installed on a sturdy, level surface. Due to stray
magnetic fields turntables should not be located nearby due to
interference.
The unit requires ventilation above and below. Do not situate it on a rug
or other soft surface and do not obstruct the air inlet and outlet grilles
on the underside and top cover. Do not place in an enclosed area such
as a bookcase or in a cabinet.
This unit must not be exposed to dripping or splashing water or other
liquids. No objects filled with liquid, such as vases, shall be placed on
the unit. In the event, switch off immediately, disconnect from the mains
supply and contact your dealer for advice.
Do not route the power cable so that it can be walked upon or damaged
by other items near it.
Electronic audio components have a running in period of around a week
(if used several hours per day). This will allow the new components to
settle down, the sonic properties will improve over this time.
Do not plug a source component directly into a power amplifier unless it
has a variable output level.
Always turn a control amplifier on before a power amplifier.
Never turn on a power amplifier when no control amplifier is connected.
It is recommended that when bi-amping, the same type power amplifiers
are used.
If you do not intend to use this unit for a long period of time, switch it off
and unplug it from the mains socket.
To clean the unit, wipe it’s case with a moist, lint-free cloth. Do not use
any cleaning fluids containing alcohol, ammonia or abrasives. Do not
spray an aerosol at or near the amplifier.
These units are not user serviceable, never attempt to repair,
disassemble or reconstruct the unit if there seems to be a problem. A
serious electric shock could result if this precautionary measure is
ignored. In the event of a problem or failure, please contact your dealer.
REAR PANEL CONNECTIONS
Note: Some features may not apply to all models. Refer to the diagram
on your accompanying Owners’ Certificate.
A & C SERIES (INTEGRATED & CONTROL AMPLIFIERS)
Ground connection
If you are connecting a turntable to your amplifier then its ground wire
should be attached to this point.
Aux/Phono
Connect any 'line level' source equipment to these sockets i.e. CD player
or DAB tuner. Alternatively a turntable can be connected, but first a
phono stage must be installed. Please contact your Cambridge Audio
dealer who can supply and install a phono stage to your amplifier. These
inputs are for analog audio signals only. They should not be connected
to the digital output of a CD player or any other digital device.
AV/DVD/MD/Tape 2
Connect a video derived audio signal to these sockets, such as the
audio monitor / receiver or Television decoder. Alternatively, any line
level audio signal may be connected here, including a second tape deck
or MiniDisc player.
INSTALLATION
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Amplifiers A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Amplifiers A1 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info