752402
32
Zoom out
Zoom in
Previous page
1/44
Next page
32 1005494 ISSUE 5
OWNER/INSTALLATION MANUAL
Fault Reason Solution
Heat pump doesn’t run
No power Wait until e power is restored
Power is switched off Switch on e power
Fuse has blown Check and change e fuse
The breaker is off Check and turn on e breaker
Fan running but wi insucient heating
Evaporator blocked Remove e obstructions
Air outlet blocked Remove e obstructions
Compressor start delay Wait for e delay timer to time out
Display normal, but no heating Set temperature too low Set desired heating temperature
Start delay Wait for e delay timer to time out
Inaccurate switch action
Stop e machine, and cut off e power supply immediately,
en contact your dealer
The fuse blows frequently or leakage circuit
breaker trips frequently
If above solutions don’t work, please contact your installer wi detailed information and your model number. Don’t try to
repair it yourself.
5�0 TESTING
Check at e fan, air inlets and outlets are not
obstructed.
It is prohibited to install refrigeration pipe or
components in corrosive environment.
Check at e electric wiring conforms to e
electric wiring diagram and at e machine is
eared.
Double check at e main power switch is off.
Check e temperature setting.
Refer to e user check list in section 5.2 and e
error codes listed in section 5.3 before initiating a
service call.
Do not attempt to interfere wi any internal control
settings as ese have been factory calibrated and
sealed.
Any sign of abnormal operation such as water
dripping should be reported immediately to
e installer. If in doubt or if advice is required
contact e Service support team on telephone
+44(0)1621 856611 (option 4).
Inspect e heat pump before use
5�1 HEAT PUMP MALFUNCTION
WARNING: Isolate heat pump electrically, and
wait 3 minutes before removing panels or
entering heat pump�
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Calorex i-Pac inverter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Calorex i-Pac inverter in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info