Manual Caliber MCD 770 (page 4 of 23) (English)

497338

Zoom out

Zoom in

1/23

ENGLISH

ID3 INFORMATION DISPLAY

If any MP3 file is available with ID3 TAG, the following ID3 information:Album title ->

Track title -> Artist title will be displayed and automatically scrolling through the display

while the file is playing.

Press button (10) “AS/PS” repeatedly to view the ID3 tag information manually.

IPOD OPERATIONS

This unit is equipped with iPod Ready function.The user has direct control of the iPod

on the front panel.

CONNECT THE IPOD

IPOD COMPATIBILITY CHART

This unit supports the following iPod software versions:

iPod 1G Not supported

iPod 2G Not supported

iPod 3G Firmware version 2.2

iPod Mini All versions

iPod 4G All versions

iPod Photo All versions

iPod Nano All versions

iPod 5G(video) All versions

ABOUT VIDEO FILE

This unit can support iPod video display output feature, however it is NOT ABLE to

select any VIDEO FILE OR VIDEO ALBUM in the iPod video.This unit will only

automatically select a music album or file regardless the connected video iPod last

playing is a video file or album. If you want to select and play a video file on the iPod

video, long press “AS/PS” button for more than 3 seconds to de-activates the front

panel control iPod feature.After the LCD display “iPod video”, the iPod now is

controllable and you can select the desired video file on iPod itself. Once selected a

video it will automatically display on the unit through the video output.

TURNING IPOD POWER ON AND OFF

The iPod power turns automatically on when it is connected to the 30 Pin connector

and as long as the vehicle’s ignition is turned ON.The iPod power can be turnde OFF

by removing the iPod from the 30 Pins connector or the vehicle’s ignition is turned OFF.

The iPod will go into the pause mode and goes into sleep mode about 2 minutes later.

NOTE:While the iPod is connected, the power cannot be turned ON or OFF from the

iPod itself.

IPOD BATTERY CHARGING

The iPod will automatically start recharging as long as the vehicle’s ignition key is turned

to ACC or ON.

SWITCH TO IPOD MODE

When the Headunit is ON and the iPod is connected to the 30 pin connector, press

button (9) “MODE” to change to iPod mode and the unit will display “iPod” for a while.

The headunit will starts reading the music files on the iPod and the playback will

automatically start. Press button (9) “MODE” repeatedly to change to other modes or

switch back to iPod mode.

IPOD INFORMATION ON THE HEADUNIT DISPLAY

Press button (10) “AS/PS” repeatedly while the iPod song is playing, the unit will display:

Song -> Artist -> Album name -> Elapsed time

SEARCHING A DESIRE SONG

Press button (19) “BAND” to go into the iPod searching Mode. Pressing button (19)

“BAND” repeatedly to access the following searching methods: 1. Playlist -> 2.Artist

-> 3.Album -> 4. Song -> 5. Genre

Press within 10 seconds button (8) to confirm and access the searching mode, then

rotate button (8) volume knob to navigate through the Album,Artist or Song list on the

iPod. Press button (8) to confirm and play the selected song. Press button (10) “AS/PS”

during the searching mode as quick move back to the last upper level of Album, Playlist,

Genre etc.

SONG SELECT

During iPod operations, press button (20) “ ” for next track. Press button (20)

ENGLISH

Tuner> DVD> iPod> AV-1 are available for selection for front speakers audio output.

• If rear zone “R-zone” is selected, user has 10 seconds to navigate through different

modes by using the volume button.

Turner> DVD. IPod> AV-1 are available for selection for rear speakers audio output.

• If no selection is being made within 5 seconds, the unit wil resume to the previous

mode.

TO OPERATE FUNCTION OF FRONT/ REAR SOURCES

• The front panel and remote control, is defaulted to control the front source’s

function/ operation.

• When “dual zone” is turned “on”, the “mode” button is used to change between the

front source and rear source. Press mode button repeatedly to change between

front and rear mode.

• The LCD will display the rear source mode for 10 seconds. User has 10 seconds to

make the operation on the rear source’s function on front panel or remote.

• The LCD display will automatically switch back to the front source after 10 seconds.

And the front panel and remote now are resumed to operate for front source’s

function again.

THE DEFAULT SETTING WHEN DUAL ZONE IS “ON”

• When “dual zone” is turned on, the audio output will be muted for about 1 second.

• The default source / mode for front zone is “tuner” and for rear zone is “DVD”

• The default volume level is “12” for both front and rear zone audio output. (Or the

volume level set as “VOL PGM” level set in the menu).

• The LCD display is defaulted to display the front mode.

• When dual zone is “on”, some of the AUDIO FUNCTION WILL NOT BE

FUCTIONAL,THESE FUNCTION ARE: Bass/ treble/ middle/ balance/ fader/ sub-

woofer/ iX-bass/ 3D Gain.

THE DEFAULT SETTING WHEN DUAL ZONE IS “OFF”

• the default audio output reverts to what the user selected for the “front zone’

source when dual zone is “on”. For example:When the dual zone is “on”, user has

selected DVD for front zone and tuner for rear zone. Once dual zone is turned “off”,

audio output for all 4 speakers become “DVD” mode.

CD OPERATIONS

This CD player is suitable for 12cm disc, do not use irregular shaped CD.

SELECT TRACKS

During CD operations, press button (20) “ ” for next track. Press button (20)

“” for previous track.Tracknumber shows on display.

During CD operation, hold button (20) “ ” for fast forward. Hold button (20)

“” for fast reverse. Cd will start from when you release the button.

PAUSE

Press button (12) “ ” to pause the CD player. Press it again to resume play.

REPEAT THE SAME TRACK

Press button (14) “RPT” to continuously repeat the same track. Press it again to stop repeat.

SCAN TRACKS

Press button (13) “INT” to play first several seconds of each track of current CD. Press

again to stop intro and listen to track.

PLAY TRACKS IN RANDOM

Press button (15) “RDM” to play all tracks on CD in random order. Press again to cancel

the function.

EJECT

Press button (6) “ ” to stop playing and eject the CD.

PLAYING A CD-R/RW

Depending on the type of CD-R/RW CD, surface condition of the CD, as well as writer,

certain CD-R/RW CD may not operate normally on this unit.

MP3 FUNCTION

How to select MP3 files

1. SEARCHING TRACK NUMBER

Press button (19) BAND, the display shows “Number”. Rotate the volume knob (8) to

select the desired track number, press the volume knob (8) to confirm and the selected

track will be played.

2. SEARCHING BY FOLDER/FILES

Press button (19) BAND twice, the display shows “Navigate”. Rotate the volume knob

(8) to navigate through all folders and sub-folders on the disc.The folder names will be

displayed. Press the volume knob (8) longer then 3 seconds to play the first track in the

folder. Press the volume knob (8) for less then 3 seconds to access the sub-folders or

tracks. Rotate the volume knob (8) to navigate, then press the volume knob to confirm

the sub-folder or the track begins to play. Press button (10) AS/PS or rotate the volume

knob counterclockwise during navigation search to move back to the last upper level of

a folder.

3. NAVIGATING THROUGH DIRECTORY BY USING PREVIOUS/NEXT FOLDER

(M5/M6) BUTTONS

Press next folder (M6) or previous folder (M5) buttons to skip in the current directory

.On

a multi-level directories CD, the movement will take place at the current level until

last folder is reached.At this point press previous folder (5) again,it will move to the next

level or directory

MCD 770 manual.qxd 22-10-2007 09:08 Pagina 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Caliber MCD 770 in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber MCD 770

Caliber MCD 770 Quick start guide - English - 11 pages

Caliber MCD 770 User Manual - English - 14 pages

Caliber MCD 770 Quick start guide - German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 11 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Caliber MCD 770 Manual

Product: