168721
9
Zoom out
Zoom in
Previous page
1/18
Next page
searches AF. The unit doesn't search this
AF (DIP) for few minutes. In the case of the
AF of NO RDS signal with high field
strength, if the real AF is wrongly masked
as DIP by some interference, the unit
hesitates to search real AFs. For this
reason, the unit has the user option (MASK
DPI) which doesn't mask the AF of NO RDS
signal with high field strength. In MASK DPI
mode, the wrong sound or long mute
(according to PI SOUND or PI MUTE) can
be heard from the AF station which has NO
RDS signal and of which the field strength is
higher than that of the currently tuning AF
(station). But, these phenomenons are rare
and the user will hardly hear the wrong
sound in whole Europe.
Mask only the AF which has different PI.
Mask the AF which has different PI and
NO RDS signal with high field strength.
Press button to operate as the
conversion of each display mode as
follows:
In radio mode: PS ->CT ->FREQ ->PTY
In CDP mode:CDP ->CT ->(ID3 TAG) -
>PS ->FREQ ->PTY
* In case of no receiving CT or PTY
Information, the display shows as “NO
CLOCK” or NO PTY”.
- MASK DPI mode:
- MASK ALL mode:
DISP
- In case of receiving a RDS station
- BEEP 2’ND mode:
PRESET 1-6
BAND/LOUD
AMS/MP3
- BEEP ALL mode:
- BEEP OFF mode:
BAND/LOUD
The beep is only heard when the second
function of the dual function button is
pressed long (2 sec). e.g.
When button( ) is pressed.
When button is pressed.
When button is pressed.
When button is pressed.
When button is pressed.
The beep sound is heard when every key
is pressed.
The beep is disabled.
Press the for 2 seconds to
reinforce the bass output. Press it for a few
seconds again to cancel the function.
Loudness Function
INFORMATION DISPLAY
- In case of receiving a non RDS station
Notes:
EQ
1. When a call comes in
In radio mode: “NO CLOCK” ->FREQ-
>”NO PTY”
In CD mode:CD -> NO CLOCK -> FREQ -
>“NOPTY
Each displaying time is several seconds,
and come back to 1'st position after several
seconds.
CT = clock time FREQ = frequency.
Pressthe buttontoturnonthe
equalization function and to select desired
audio mode. There are four kinds of mode
as below:
Exhibit current frequency and activated
functions on the LCD display.
The led display will flash if the front panel is
not inserted into the main unit.
When a call is received, 'TEL CALL' is
displayed and all the unit functions are
temporarily interrupted.
Equalization
LCD DISPLAY
FLASHING LED
ESP FUNCTION
TEL Mute
The audio system automatically mutes
whenever a call comes in.
Note: the function will not work if a cable is
not connected to the car phone.
To select playback mode
In power on mode, press button
repeatedly to select the different modes as
the following sequence: RADIO, DISC (with
a CD/MP3/WMA disc inside the disc slot) ,
USB(with a USB device inside the USB
port), SD card(with a card inside the card
slot) or AUX mode.
This unit has the electronic shockproof
feature. So that if the unit skips due to rough
road conditions, the playback of the disc /
USB / SD will be uninterrupted.
MODE
BEEP 2’ND/ALL/OFF
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber mcd 163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber mcd 163 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber mcd 163

Caliber mcd 163 Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info