696853
45
Zoom out
Zoom in
Previous page
1/72
Next page
IDRO PRINCE
3
12-16-23-23 H
2
O - IDRO PRINCE 30-30 H
2
O - AQUOS
3
16-23-23 H
2
O - IDRON 16-22 AIRTIGHT - MIRA 16-22 -
TESIS 16-23
AIRTIGHT - HIDROFIRE 22.8
45
NOTE: Some of the items listed above cannot be activated in certain “system configurations”.
a - Language
To select the language act as follows:
Press the menu button.
Scroll to “Settings” using the arrows
Press menu to confirm.
Scroll to “language” using the arrows.
Press menu to confirm.
With the + - keys select the language of interest (IT/EN/DE/FR/ES/NL/PL/DA)
Press menu to confirm and esc to exit.
b - Cleaning
To select “Cleaning (only when the boiler is switched off) act as follows:
Press the menu button.
Scroll to “Settings” using the arrows
Press menu to confirm.
Scroll to “Cleaning using the arrows.
Press menu to confirm.
Select “On” with the + - keys.
Press menu to confirm and esc to exit.
c - Feed screw loading
Allows to fill the pellets loading system. It can only be activated with the boiler switched off, it displays an 180” countdown after
which the feed screw stops automatically, as when exiting the menu.
To select “Feed screw loading (only when the boiler is switched off) act as follows:
Press the menu button.
Scroll to “Settings” using the arrows
Press menu to confirm.
Scroll to “Feed screw loading using the arrows.
Press menu to confirm.
Select “Enable” with the + - keys.
Press menu to confirm and esc to exit.
d - Tones
This function is disabled by default, so to enable act as follows:
Press the menu button.
Scroll to “Settings” using the arrows
Press menu to confirm.
Scroll to “tones” using the arrows.
Press menu to confirm.
Select “On” with the + - keys.
Press menu to confirm and esc to exit.
e - External thermostat (see relative chapter)
EXTERNAL THERMOSTAT (not included with the boiler, it is the user’s responsibility)
The stove can also be temperature-controlled by an external room thermostat. It is positioned centrally with respect to the room
where the appliance is installed and ensures greater consistency between the heating temperature requested of the stove and the
actual temperature the stove supplies.
Connect the wires from the external thermostat to points 1-2 on the stove terminal board.
Once the thermostat is connected, it must be enabled.
Do so as follows:
Press the menu button.
Scroll to “Settings” using the arrows.
Select by pressing “menu.
Scroll once again to “External thermostat” using the arrows.
Select by pressing “menu.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel MIRA 22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel MIRA 22 in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel MIRA 22

Cadel MIRA 22 User Manual - German - 76 pages

Cadel MIRA 22 User Manual - Dutch - 72 pages

Cadel MIRA 22 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info