694380
24
Zoom out
Zoom in
Previous page
1/40
Next page
24
EOLO - COMFORT 80
EN
After a black-out of more than 5 seconds, the stove enters the stage “COOLING WAIT”. At the end of cooling
stage, it starts automatically up with the different stages (see IGNITION page 23)
11.9 TEMPERATURE SETTING
To modify the room temperature, it is sufcient to press P1 and P2 keys according to the desired temperature
when the display shows “SET TEMP ROOM”.
To display the set temperature, press P1 key.
11.10 FUME TEMPERATURE
To check fume temperature at the exhaust outlet, it is sufcient to keep pressed P2 key.
11.11 SWITCHING OFF
To switch off the stove keep pressed P4 key: the display shows “FINAL CLEANING”. After 10 minutes also the fume
extractor switches off (this occurs always, whether the stove is hot or cold). Then the display shows “OFF”.
If the pellets are of bad quality (if contain sizing agents, oils, varnishes, plastic remains or if
it is mealy), during the running deposits will form along pellets drop pipe. When the stove is
switched off, these remains could form little hot coals that rising along the pipe could reach
the pellets on the hopper burning them and creating a thick and harmful smoke inside tho
room. Please always keep the hopper closed with its own lid. If the pipe is sooty, please
clean it (see INTRODUCTION page 27).
11.12 CLOCK SETTING
Press P3 and then P5 key till the display shows the menu (02) SET CLOCK.
Press P3 key (DAY) and with P1 and P2 keys select the day of the week (Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday, Sunday).
Press P3 key again (TIME) and with P1 and P2 keys select the time.
Press P3 key again (MINUTES) and with P1 and P2 key select the minutes.
Press P3 key again (DAY) and with P1 and P2 key select the day of the month (1, 2, 3 …29, 30, 31).
Press P3 key again (MONTH) and with P1 and P2 keys select the month.
Press P3 key again (YEAR) and with P1 and P2 keys select the year.
To exit press twice P4.
11.13 DAILY PROGRAMMING
It is useful to enable, disable and set daily chronothermostat functions. Press P3 key and then P5 key till the display
shows (03) “SET CHRONO”. Press P3 key and with P5 and P6 key select “PROGRAM DAY”. Press P3, the display
shows “CHRONO DAY”. With P1 and P2 keys put in “OFF” or “ON”.
It is possible to set two running period limited by the selected times.
After “CHRONO DAY”:
Press P5: the display shows “START 1”, with P1 and P2 keys enter the ignition time or put in “OFF”.
Press P5: The display shows “STOP 1”, with P1 and P2 keys enter the switching off time or put in “OFF”.
Press P5: the display shows “START 2”, with P1 and P2 keys enter the ignition time or put in “OFF”.
Press P5: the display shows “STOP 2”, with P1 and P2 keys enter the switching off time or put in “OFF”.
To exit press three times P4 key.
11.14 WEEK-END PROGRAMMING
It is useful to enable, disable and set the chronothermostat functions during the weekend. Press P3 key and then
P5 key till it appears (03) “SET CHRONO” menu. Press P3 key and with P5 and P6 keys select “PROGRAM WEEK-
END”. Press P3 till the display shows “CHRONO WEEK-END” and, with P1 and P2 keys put in “OFF” or “ON”.
It is possible to set two running periods limited by the selected times which activate only saturday and sunday.
After “CHRONO WEEK-END”:
Press P5: the display shows “START 1 WEEK-END” and with P1 and P2 keys enter the ignition time or put in “OFF”.
Press P5: the display shows “STOP 1 WEEK-END” and with P1 and P2 enter the switching off time or put in “OFF”.
Press P5: the display shows “START 2 WEEK-END” and with P1 and P2 keys enter the ignition time or put in “OFF”.
Press P5: the display shows “STOP 2 WEEK-END” and with P1 and P2 enter the switching off time or put in “OFF”.
To exit press three times P4 key.
11.15 WEEKLY PROGRAMMING
It is useful to enable, disable and set weekly chronothermostat functions (saturday and sunday included).
Press P3 key and then P5 till the menu (03) “SET CHRONO” appears. Press P3 key and with P5 and P6 keys select
“PROGRAM WEEK”. Press P3 and the display shows “weekly chrono” and with P1 and P2 keys put in “OFF” or
“ON”.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel Eolo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Eolo in the language / languages: English as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Eolo

Cadel Eolo User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info