694380

Cadel Eolo Manual

23
Zoom out
Zoom in
Previous page
1/40
Next page
23
EOLO - COMFORT 80
EN
POS. REFERENCE DESCRIZIONE
10 FLAME SETTING Enables to adjust the ame depending on chimney ue draught.
11.5 IGNITION
We remind you that the rst ignition must be executed by authorized and skilled technical personnel who checks
that all is installed in compliance with current regulations and veries stove’s efciency.
• If inside the combustion chamber there are booklets, manuals, etc.… please remove them.
• Check if there are pellets in the hopper.
• Check that the door is correctly closed.
• Check that the plug is correctly put into the electric socket.
• Before starting up the stove, please assure you that the burning pot is clean.
• To start up the stove, keep pressed P4 key for little while till it appears “START” and then “PREHEATI WAIT”
which starts the preheating of the ignition resistance. After 2 minutes, the display shows “PELLET LOAD, FIRE
WAIT” when the auger load the pellet and the heating of the resistance goes on. When the temperature is
sufciently high (after about 7-10 minutes), the ignition has occured and the display shows “FLAME PRESENT”.
• When “FLAME PRESENT” stage has nished, the control unit enters on “WORK” mode and displays the selected
caloric power and room temperature. It is in this stage that P5 and P6 keys adjust the power from 1 to 5. If
room temperature exceeds the limit established during the setting, the caloric power falls at the minimum
displaying “WORK, MODULAT”. When the room temperature returns below the selected temperature, the
stove returns to the set power.
11.6 STOVE ADJUSTMENT
The stove is set in compliance with chimney ue and used pellets data, according to technical characteristics
(see FEATURES page 38). If the data do not correspond, the technician can set the stove.
• If the pellets is small in size and with a greater caloric power, (for example because of encrusted re pot)
decrease the pellet drop through the menu “FLAME SETTING”, press P3 key “PELLET TYPE”, press again P3
“PELLET LOAD” and with P2 key decrease the pellet quantity from -1 (i.e. -2%) to -9 (i.e. -18%).
• If the chimney ue has a lower draught (for example because of a weak ame or sooty glass) increase
the fume motor revolutions through the menu “FLAME SETTING”, press P5 key “CHIMNEY TYPE”, press P3 key
“FUME-EXT, CHIMNEY” and with P1 key increase the exhaust fan from +1 (i.e. +5%) to +9 (i.e. +30%).
• If the chimney ue has a greater draught (for example because of pellet fall from the burning pot) decrease
the exhaust fan revolutions from -1 to -9.
Pay attention to positive and negative values.
11.7 FAILED IGNITION
If the pellets do not burn, the failed ignition will be indicated by the alarm “NO IGNITION”
• If the room temperature is lower than 10°C, the plug is not able to bear the ignition stage. To support it please
insert some pellets in the burning pot and a piece of burning relighter igniter material on the pellets (for
example relighters cubes).
After a failed ignition the burning pot must be empty from the amassed pellets, before
starting up again the stove.
• Too much pellets in the burning pot, or humid pellets, or sooty burning pot make ignition difcult and create
dense white smoke which is harmful to health and can cause explosions on the combustion chamber. It is
therefore necessary not to stand in front of the stove during ignition stage if dense white smoke is present.
If after some months the ame appears weak and/or orange colored or the glass tends to
blackens and the burning pot to become encrusted, clean the stove, clean the fume pipe
and the chimney ue.
11.8 POWER FAILURE
• After a black-out off less than 5 seconds, the stove returns to the set power.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel Eolo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Eolo in the language / languages: English as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Eolo

Cadel Eolo User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info