643579
29
Zoom out
Zoom in
Previous page
1/40
Next page
29
MIRIAM - MARY - PRETTY - VERVE - CRISTAL
EN
power supply to the auger.
Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and then is in "OFF".
Check the type of glitch as ALARMS page 33.
Unscrew the black cap, press the button and screw the cap again.
Clean the burning pot and start the stove up again with P4 key.
14
MAINTEINANCE
14.1 INTRODUCTION
For a long working life of the stove, have a periodic cleaning of the stove as described in the following paragrafs.
Fume outlet pipes (fume conduit + chimney ue + chimney pot) must always be cleaned, scrubbed and
checked by an authorized technician in compliance with local regulations, with the instructions of the
manufacturer and those of your insurance company.
If there are no local regulations and no instruction from your insurance company, it is necessary to have your
fume pipe, chimney ue and chimney pot cleaned at least once a year.
It is also necessary to have the combustion chamber, motors and fans cleaned and to have the gaskets and
the electronical elements checked at least once a year.
All these operations must be planned in time with your Autorized Technical Assistance
Service.
After a long ineffective time, before turning on the stove check if there are obstructions in the fume exhaust.
If the stove had been using continuously and intensely, the whole system (chimney included), must be
cleaned and checked more frequently.
In case of replacement of damaged pieces please ask for the original spare part at the Autorized Retailer.
14.2 BURNING POT AND ASH TRAY CLEANING
The burning pot and ash tray cleaning must be executed at least every 2 days.
Open the door.
Fig. 43 - Burning pot extraction Fig. 44 - Burning pot cleaning
Extract the busrning pot (see Fig. 43 page 29) from its seat and empty it from the ash.
If becessary clean with a pointed object the holes obstructed by encrustations (see Fig. 44 page 29).
Fig. 45 - Burning pot box cleaning Fig. 46 - Cleaning with a brush Fig. 47 - Correct position of the re plate
Clean and drain away the burning pot from ash which has accumulated in its inner (see Fig. 45 page 29).
Clean also the hole for pellet drop with a brush (see Fig. 46 page 29).
Check if the re plate is placed in the correct position (see Fig. 47 page 29).
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel Cristal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Cristal in the language / languages: English as an attachment in your email.

The manual is 12,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Cristal

Cadel Cristal User Manual - German - 40 pages

Cadel Cristal User Manual - Dutch - 40 pages

Cadel Cristal User Manual - French - 44 pages

Cadel Cristal User Manual - Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info