643579
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
MIRIAM - MARY - PRETTY - VERVE - CRISTAL
EN
13
SAFETY SYSTEM
13.1 INTRODUCTION
Safety devices are used to prevent and avoid the risk of damages to people, animales and objects.
It is forbidden to execute repearing by no authorized personnel otherwise the warranty and the manufacturer
liability fall.
13.2 "BLACK OUT" ALARM
"ACTIVE ALARM" "AL 1 - BLACK OUT": current breaking during ignition.
Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and then is in "OFF":
Clean the burning pot and start the stove up again with P4 key.
13.3 "EXHAUST PROBE" ALARM
To the exhaust is connected a probe which contantly controls the temperature during working time.
"ACTIVE ALARM" "AL 2 - EXHAUST PROBE": the probe is damaged or disconnected.
Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and the is in "OFF".
Check the type of glitch as ALARMS page 33.
Clean the burning pot and start the stove up again with P4 key.
13.4 "HOT EXHAUST" ALARM
If the fume probe registers a temperature at the exhaust higher then 180°C, the display shows "HOT EXHAUST".
Then the combustible (pellet) drop will be decreased at phase 1.
This function has the aim to bring the values within preset values. If for any reason the temperature would not
decreas but increase, at 215°C the display shows "ACTIVE ALARM" "AL 3 - HOT EXHAUST" and the stove start the
switching off phase up.
Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and the is in "OFF".
Check the type of glitch as ALARMS page 33.
Clean the burning pot and start the stove up again with P4 key.
13.5 "FAN FAILURE" ALARM
"ACTIVE ALARM" "AL 4 - FAN FAILURE": the fume fan is out of order.
Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and the is in "OFF".
Check the type of glitch as ALARMS page 33.
Clean the burning pot and start the stove up again with P4 key.
13.6 "FAILED IGNITION" ALARM
"ACTIVE ALARM" "AL 5 - FAILED IGNITION": the temperatureis not sufcient for ignition.
Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and the is in "OFF".
Check the type of glitch as ALARMS page 33.
Clean the burning pot and start the stove up again with P4 key.
13.7 "NO PELLET" ALARM
If the fume probe registers a temperature at the exhaust lower than the minimum threshold and the display
shows "ACTIVE ALARM" "AL 6 - NO PELLET".
Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and the is in "OFF".
Full the hopper.
Clean the burning pot and start the stove up again with P4 key.
13.8 "THERMAL SAFETY" ALARM
In the hopper is installed a thermostat with manual reset which activates if the temperature excursion exceeds
the allowed limits, so avoiding the possibility that the pellet inside the hopper could burn because of overheating.
"ACTIVE ALARM" "AL 7 - THERMAL SAFETY": the thermostat stops the power supply to the auger.
Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and then is in "OFF".
Check the type of glitch as ALARMS page 33.
Unscrew the black cap, press the button and screw the cap again.
Clean the burning pot and start the stove up again with P4 key.
13.9 "FAILURE DEPRESS" ALARM
To the boiler is connected a pressostat which control the depression and in some stove models on the re door
id installed a microswitch which registers the opening.
"ACTIVE ALARM" "AL 8 - FAILURE DEPRESS": the pressostat and/or re door which is not correctly closed stops the
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadel Cristal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadel Cristal in the language / languages: English as an attachment in your email.

The manual is 12,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadel Cristal

Cadel Cristal User Manual - German - 40 pages

Cadel Cristal User Manual - Dutch - 40 pages

Cadel Cristal User Manual - French - 44 pages

Cadel Cristal User Manual - Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info