Manual Bushnell TROPHY CAM XLT 119456 (page 16 of 224) (English, German, French, Italian, Portuguese, Spanish)

559496

Zoom out

Zoom in

1/224

for videos, this is independent of the length of each video recording-

it’s how often videos are recorded, not how long each one lasts.

Your options are 60 minutes, 30 minutes, 15 minutes,5 minutes (this

is the default), or 1 minute-use the UP/DOWN keys to select your

preference, then press OK to save it.

6. Here’s an example of how the camera would operate, based on the

following Field Scan settings:

Field Scan: On

[Start]: 16:00

[Stop]: 18:30

Interval: 15M

These settings would cause the camera to take a photo (or video,

depending on which you have it set for) beginning at 4 PM, then

another one at 4:15, 4:30, etc.–one every 15 minutes, until the Field

Scan recording stops at 6:30 PM. The next day, the camera would

again record an image or video once every 15 minutes between 4 and

6:30 PM. Remember, this is independent of normal triggers due to

animal activity–even if no animals enter the IR sensor coverage zone,

an image or video will still be captured every 15 minutes during the

2.5 hour block of time. If an animal triggers the camera “in between”

the 15 minute intervals, it will be recorded, same as it would if you

had setup the camera with Field Scan turned Off. Note: Field Scan

settings of frequent intervals and/or long periods between start

and stop time can reduce battery life.

Step 2-set Start Time

(Hour & Minute)

Step 3-set StopTime

(Hour & Minute)

Step 4-set Interval

(60, 30, 15, 5 or 1 M)

Step 1-set Field

Scan Mode to “On”

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell TROPHY CAM XLT 119456 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell TROPHY CAM XLT 119456 Manual

Product: