Manual Bushnell TROPHY CAM XLT 119456 (page 15 of 224) (English, German, French, Italian, Portuguese, Spanish)

559496

Zoom out

Zoom in

1/224

Field Scan Feature

Field Scan is a revolutionary new feature for the Bushnell Trophy Cam, which

allows you to monitor your food plots or ﬁeld edges with time lapse images

or video. When set to “On”, the Trophy Cam will take a photo (or record a

video clip) automatically at your choice of intervals during a block of time you

set up for each day, without requiring a trigger from an active animal.

This has the advantage of giving you the ability to monitor the edge of a ﬁeld

that might be 50 or 150 yards away from the camera out of the PIR sensor’s

range. The result is an effective range much greater than it would normally

be, with the camera dependant on triggers generated by nearby animals.

This is a great tool for hunters to scout an entire ﬁeld with only one camera.

If an animal does enter the area covered by the IR sensor and generate a

trigger event during a time in between the Field Scan intervals you set, the

camera will capture an image or video just as it normally would, based on

your other menu settings. Here’s how to setup and use Field Scan (be sure

you’ve set the current time in “Clock Set” ﬁrst, so your Field Scan recording

will stop and start at the correct times of day):

1. Move the main switch to SETUP, then press MENU.

2. Keep pressing the RIGHT key, stepping through the Setup Menu until

you reach Field Scan.

3. With “On” selected (press UP/DOWN to toggle between On/Off),

press OK. This takes you to the screen to set Start and Stop time,

which determines the clock times when the Field Scan recording will

begin and end for each day. You can set these times to the exact hour

and minute you want, for a recording “block” that lasts anywhere from

just a minute to a full 24 hours.

4. Set the [Start] and [Stop] times, beginning with the Start hour, using

the UP/DOWN keys to change the setting. The hour setting is based

on a 24-hour clock, with “00” hours = midnight, “12” hours = noon,

“23” hrs = 11PM, etc. To move to the next setting, press the RIGHT

key, change the minute for the Start time with UP/DOWN, then on to

the hour and minute settings for the Stop time.

5. After you ﬁnish setting the last time setting (Stop minutes), another

press of the RIGHT key will take you to the setting for Interval. This

lets you control how often a photo or video clip is recorded during the

block of time you deﬁned with the Start and Stop settings. Note that

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell TROPHY CAM XLT 119456 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell TROPHY CAM XLT 119456 Manual

Product: