719120
49
Zoom out
Zoom in
Previous page
1/52
Next page
49
3. Pace the grids on the grill and let them burn-in for 45 minutes at the highest temperature with the
lid closed. This burns the grease permanently onto the iron thus creating a protective patina.
MAINTENANCE OF THE STAINLESS STEEL GRIDS
Stainless steel grids do not need to be burned in. You can clean the durable grids with warm water, mild
detergent and a sponge by hand or in the dishwasher.
Stainless steel can slightly discolour when exposed to high temperatures. This is a natural process and
has no effect on the quality or your grilling result.
MAINTENANCE AND CLEANING OF THE INFRARED CERAMIC BURNER
The ceramic brick cannot be cleaned. Fat and meat juices dripping onto the ceramic brick will combust.
Hence, staining of the brick and baked-on residues are normal and do not affect the burner’s performance.
WARNING: Under no circumstances shall the ceramic brick be cleaned with water and/or de-
tergents. If something falls through the protective grid and is not burnt completely, adjust the
burner to the highest heat possible and let all residues combust for 10-15 minutes.
Make sure to only cook non-marinated grilables on the ceramic brick. Salty and acidy marinades or pep-
per may damage the ceramic brick when dripping down during cooking over long periods of time.
REGULAR MAINTENANCE
After grilling, you should prepare the grill for the next use. Let the grill burn freely at maximum heat
with the lid closed to burn up any residues on the grids and then brush them off.
Follow the procedure below to do this:
1. Remove all grilled food from the grill and set the grill to maximum heat with the lid closed. Let it
burn freely for 15-30 minutes until no more smoke comes out of the grill. For tough stains, turn the
grids so that the used side faces the bottom.
2. Close the gas cylinder valve (rotate to OFF) and subsequently turn the control knobs to the OFF
position.
3. Next, use a long-handled stainless steel brush to clean the grill. Make sure to wear grilling gloves or
potholders since the grill is still very hot.
4. Pour some rapeseed or sunflower oil on a cloth and rub it on the grids to prevent rust. Stainless steel
grids need no further maintenance.
It is recommended that you clean the dirty spots on the edge of the cast iron grids separately every 23
times you use the grill. Here, you should first let the grill burn freely and then clean it using a wire brush.
To clean the dirty spots on the edges, remove the grids from the grill and scrub them carefully under
warm water (no detergent) using a wire sponge (pot sponge). Afterwards, use a cloth to dry them thoro-
ughly, apply some oil, and pace them back into the grill.
Stainless steel grids can easily be cleaned with detergent, sponge and warm water or in the dishwasher.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burnhard Fat Fred at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burnhard Fat Fred in the language / languages: English, German as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info