719120
47
Zoom out
Zoom in
Previous page
1/52
Next page
47
OPERATING THE GAS GRILL
Before you use the gas grill for the first time, you should definitely first wipe the surface of the lid and
the outer parts of the combustion chamber with a damp cloth. This will prevent any residues from the
production process from burning in.
Before grilling for the first time, allow it to burn for 40 minutes without food. Preservation residues are
removed in this way. You need not worry if it results in a slight odour. This is harmless. Make sure the grill
is adequately ventiated. Scrub the grids with a stainless-steel brush afterwards.
The colour inside the gas grill can change slightly. This is a natural process.
IGNITING THE GAS GRILL
1. Open the grill lid.
2. Turn all control knobs clockwise to the “OFF
position.
3. Connect the pressure reguator to the gas
cylinder.
4. Open the gas cylinder valve and use a leak de-
tection spray or soapy water to check for leaks
between the gas pressure reguator and the gas
cylinder.
5. You can light the burners independently.
6. Press and hold down one of the knobs while
turning it anticlockwise to the “HI” position.
You will hear a “click” sound and the burner
should ignite. If it does not ignite right away,
repeat this step 3 to 4 times.
7. Warning: If the burner does not ignite after
repeated attempts, turn the knob clockwise to
the “OFF” position and close the gas cylinder
valve. Wait 5 minutes and then start again from
step 4.
8. Once you have ignited the burner, repeat steps
6 and 7 with the other knob to ignite the se-
cond burner.
9. Adjust the heat by turning the control knob to
the desired setting between the highest (HI)
and lowest (LO) levels.
USING THE INFRARED CERAMIC BURNERS
The burner heats a ceramic stone perforated with small holes. The energy is stored by the stone, through
which particuarly high temperatures can be achieved.
You can give steak and burger patties a crunchy crust in a few minutes without affecting the core
temperature too much.
The ceramic burner are reguated stagelessly, just like a conventional stainless-steel burner.
1. Turn the control knob counterclockwise until the gas can be heard.
2. Count to 5 and ignite the burner by turning the knob a little further until you hear the "click" of the
piezo ignition.
3. If the burner does not ignite, proceed as with the stainless steel burners.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burnhard Fat Fred at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burnhard Fat Fred in the language / languages: English, German as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info