Manual Burley Flatbed 2004-2006 (page 6 of 16) (English)

632543

Zoom out

Zoom in

1/16

Burley Flatbed Owner's Instruction and Safety Manual

V. Hitching the Burley Flatbed to Your Bicycle

The trail er hitch was

designed to quick ly

and safe ly at tach to

vir tu al ly all types of

bi cy cles. It is in sert ed

in front of the left

rear drop out of your

bicycle.

Loos en the knob

on the eye bolt un til

the two arms are

spread fully apart.

Slip the low er hitch

arm un der the chainstay (A) and the up per arm above the seatstay (B). (See

il lus tra tion above.) Wedge the hitch cone all the way back into the an gle

formed by the stays at the wheel. Tight en the knob un til the arms are ﬁ rm ly

clamped against the stays. Wrap the safe ty strap around the in side of the

chainstay, over the hitch body, and back to the D-ring at the end of the

tongue.

Make sure that the cone is wedged se cure ly into the stays. The knob should

be ﬁ n ger-tight; do not over tight en. The hitch should not move, but should

al low the bi cy cle com plete move ment, in clud ing ly ing it down on the

ground. It should clear any racks, bags, or ﬁ t tings you have on your bi cy cle. If

there is any in ter fer ence, con tact your Burley dealer.

IMPORTANT: Re move trailer from your bi cy cle when it’s not in use to

pre vent de form ing the plastic hitch.

Do not operate trailer without hitch safety strap prop er ly

installed. A dangling safety strap can contact spokes and

damage rear wheel or cause ac ci dent re sult ing in se ri ous

injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Burley Flatbed 2004-2006 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Burley Flatbed 2004-2006 Manual

Product: