632543

Burley Flatbed 2004-2006 Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
4
Burley Flatbed Owner's Instruction and Safety Manual
IV. Attaching the Wheels and Tongue
First, verify that the tires are infl ated to 30–35 P.S.I. Next, tip the trailer frame
on its back end. If you are work ing on a rough or dirty sur face, lay down a
cloth or oth er pro tec tive bar ri er to avoid damage to your trailer. Move the
quick-release lever to the unlocked po si tion and place the wheels into the
drop outs, making cer tain that the axles go all the way into the slots.
IMPORTANT: Wheels are dished off-center and must be in stalled
so that tires are offset away from side rails, closest to outer frame.
Dished wheels are a unique feature from Burley; they create a
wider track, and thus a more stable trailer.
Once the wheels are ful ly seated in the dropout slots, the quick-release lever
should be positioned so that it operates in the fore and aft direction. The
lever is marked for open or closed po si tions. Tighten the right-hand wheel by
moving the lever from the front (open) to the rear (closed) position. Tighten
the left-hand wheel by moving the lever from the rear (open) to the front
(closed) position. Use the thumb nut to adjust for correct spacing of the
quick-release lever.
When properly ad just ed, you will feel re sis tance halfway through tight en ing
the lever (when the lever is pointing straight out away from the trailer). If you
are unfamiliar with the use of quick-release levers, contact your Burley dealer
for a demonstration.
The quick-release lever
op er ates in fore-aft di rec tion
(with lever below the axle).
The drawing shows left-hand
wheel in the closed po si tion.
Open
Position
Closed
Position
The quick-release
lever and fl at side
of wheel must be
in stalled toward
outside of trailer.
Correct
Wrong
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Flatbed 2004-2006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Flatbed 2004-2006 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info