Manual Burley Encore X (page 10 of 40) (English, German, French, Spanish)

772367

Zoom out

Zoom in

1/40

CHILD TRAILER

10 ENG

Hooking up Your Trailer

1. Quick Release or Nutted Axle: Remove quick release skewer or nut from

the left side of bike’s rear wheel axle. Install hitch between quick release

or nut and frame (Figure 24). Tighten the quick release or nut following

manufacturer’s recommendation. The hitch can remain on the bike when

trailer is removed. Consult Burley.com for accessories designed to help

fit your trailer to your bike.

Thru Axle: Consult Burley.com to obtain proper fit and installation to your

bike (Figure 25).

2. Hooking the tow bar to the hitch: Insert flex connector in between the two

tabs on the hitch (Figure 26), such that all the holes are aligned. Insert

retaining pin and close retainer (Figure 27). Wrap safety strap around the

frame of the bike twice and latch to the D-ring on the tow bar (Figure 28).

3. Removing the tow bar from the hitch: Unlatch the safety strap from the

D-Ring and unwrap it from the frame of the bike. Open the retainer on

the retaining pin and remove it. Then remove the flex connector from the

hitch.

Figure 24

Figure 25

Figure 26

Figure 27

Figure 28

Safety strap

Hitch

Retaining pin

Flex Connector

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Burley Encore X in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 16.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Burley Encore X Manual

Product: