Manual Burley Encore X (page 8 of 40) (English, German, French, Spanish)

772367

Zoom out

Zoom in

1/40

CHILD TRAILER

8ENG

Locking the Brake

1. To lock the brake, slide the lever to the right

(Figure 17). To release the brake, slide the lever

to the left.

Adjusting the Handlebar

1. Tow mode: Always rotate the handlebar forward when

trailer is in towing mode (Figure 18A). The handlebar should

be horizontal and parallel to the ground, such that the mark

on the handlebar is aligned with the bolt that attaches the

cover (Figure 19).

2. Stroll / Jog mode: The handlebar may be rotated to serve

as a handlebar while trailer is in strolling or jogging mode

(Figure 18B). Open lever to rotate (Figure 19) and close

lever to lock in place.

Note: Always use the jogging tether when used as a stroller. The roll bar

lever tension is optimally adjusted from the factory. If the roll bar slips when

lifting up or pushing down – or if it makes excessive noise when rotating –

the lever tension can be fine-tuned by removing the handlebar cover on the

opposite side of the lever. Release the lever, squeeze the outer frame together

and turn the barrel nut in 180 degree increments. Tighten barrel nut to desired

tension. Then reinstall the handlebar cover.

Figure 18

Figure 19

Figure 17

Figure 20 Figure 21

Securing the Cover and Flag

1. Slip the cover D-rings over the hooked corners of the tow

bar receivers (Figure 20).

2. Depress the yellow button and slide the flag pole into

hole on flag holder. To release, push button and lift flag

pole out (Figure 21).

Installing Additional Lights

Fabric loops are located on the back of the cover and should

be used to attach additional lights and/or reflectors (See page

4).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Burley Encore X in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 16.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Burley Encore X Manual

Product: