772370
13
Zoom out
Zoom in
Previous page
1/24
Next page
OWNER’S INSTRUCTION & SAFETY MANUAL 10
BURLEY.COM
Variable Width Yoke Installation
1. Insert yoke into the slotted brackets at the front
end of the trailer body. (Figure 7)
2. Insert the long quick release skewer into top
bracket hole, passing through the yoke. (Figure 7)
3. Screw on quick release skewer adjustment nut,
making sure there is a spring on either side of the
mounting brackets, and thread on until the cam
lever can be tightly closed. (Figure 8)
4. Close the quick release cam lever, ensuring that
the lever handle is facing away from the bicycle
wheel. (Figure 8)
Figure 7
Figure 8
Montage der verstellbaren Gabel
1. Setzen Sie die Gabel in die geschlitzten
Halterungen vorn am Aufbau ein. (Abbildung 7)
2. Führen Sie den langen Schnellspannerstift in das
obere Loch der Halterung und durch die Gabel.
(Abbildung 7)
3. Schrauben Sie die Schnellspanner-Einstellmutter
auf. Stellen Sie sicher, dass sich eine Feder
an beiden Seiten der Halterungen befindet.
Schrauben Sie die Mutter auf, bis der
Exzenterhebel fest geschlossen werden kann.
(Abbildung 8)
4. Schließen Sie den Schnellspanner-Exzenterhebel.
Achten Sie darauf, dass der Hebelgriff vom
Fahrradlaufrad weg zeigt. (Abbildung 8)
Montage de l’attelage à largeur
variable
1. Insérez l’attelage dans les supports fendus situés
à l’arrière du châssis de la remorque. (Figure 7)
2. Insérez la broche à blocage rapide dans le trou
des supports et dans l’attelage. (Figure 7)
3. Vissez l’écrou de réglage de la broche à blocage
rapide en vous assurant de la présence d’un
ressort de chaque côté des supports de fixation,
et continuez de visser jusqu’à ce que le levier à
came ferme bien. (Figure 8)
4. Fermez le levier à came en veillant à ce que sa
poignée soit tournée vers la remorque. (Figure 8)
Instalación de la horquilla de
anchura variable
1. Inserte la horquilla en los soportes ranurados
en el extremo frontal del chasis del remolque.
(Figura 7)
2. Inserte el espigón de desacople en el orificio
del soporte superior, pasando a través de la
horquilla. (Figura 7)
3. Enrosque la tuerca del espigón de desacople,
asegurándose de que haya un muelle a cada
lado de los soportes de montaje, y apriete
hasta que la palanca de la leva pueda cerrarse
apretada. (Figura 8)
4. Cierre la palanca de desacople, asegurándose
de que el tirador de la palanca mira en sentido
contrario a la rueda de la bicicleta. (Figura 8)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Coho XC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Coho XC in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 4.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info