779878
40
Zoom out
Zoom in
Previous page
1/124
Next page
MY20B01-12_1.0_12.06.2019 40
Overview
Applies only to Pedelecs with eShift with NuVinci
H|Sync/ enviolo with Optimized H|Sync
Applies only to Pedelecs with eShift with Rohloff
E-14 Speedhub 500/14
3.6.5 System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error. You
will find assistance for system messages in 8.5
First aid. There is a table of system messages in
the Appendix.
3.6.6 ABS indicator lamp
The anti-blocking system indicator lamp must light
up after the system has started up and must go
out once speed has reached about 5 km/h. If the
ABS indicator lamp does not light up when the
electric drive system starts, the ABS is defective.
An error code on the display also tells the rider
that it is defective.
If the indicator lamp does not go out after you set
off or it lights up while you are riding, this means
there is an error in the anti-blocking system. The
anti-blocking system is then no longer active. The
brake system itself remains functional. It is only
the anti-blocking system control which no longer
operates.
If the ABS indicator lamp is lit, the ABS function is
not active.
Note: You need to stop and restart the pedelec
(switch off and on again) to reactivate the anti-
blocking system.
Screen display Change
Gear calibration This is where you can perform a
calibration on the stepless gear.
Press on the Lighting button to
confirm calibration. Then follow the
instructions. You also might need
to perform a calibration while riding
in the event of a fault. In such
cases, you also press on the
Lighting button to confirm
calibration and then follow the
instructions on the display. This
menu option is only shown when
the on-board computer is
positioned in its mount
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 47: Changing the system settings
Screen display Change
Start gear This is where you can set the start
gear.
The automatic reset function is
switched off in Position – –. This
menu option is only shown when
the on-board computer is
positioned in its mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 48: Changing the system settings
Notice
The anti-blocking system indicator lamp may light
up if the front and rear wheels are rotating at
widely different speeds from one another – for
example, if the rider cycles on the rear wheel only
or if a wheel is rotating for a unusually long time
without making contact with the ground (fitting
stand). The anti-blocking system switches off in
such cases.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Cross Rider Evo - Bosch Intuvia 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Cross Rider Evo - Bosch Intuvia 2020 in the language / languages: English as an attachment in your email.

The manual is 18.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Cross Rider Evo - Bosch Intuvia 2020

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - German - 123 pages

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - Dutch - 126 pages

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - French - 129 pages

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - Italian - 128 pages

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info