779878
38
Zoom out
Zoom in
Previous page
1/124
Next page
MY20B01-12_1.0_12.06.2019 38
Overview
3.6.4.5 Gear recommendation
Pedalling frequencies higher than 50 revolutions
per minute optimise drive unit efficiency.
However, very slow pedalling uses up a great deal
of energy. You can increase the speed and range
while applying the same force by selecting the
right gear. It is therefore best to follow gear
recommendations.
The gear recommendation function reacts to
excessively slow or excessively quick pedalling
and recommends a change of gear.
The gear recommendation function has to be
switched on in the system settings.
3.6.4.6 Tachometer screen
The tachometer shows the current speed at all
times.
You can select whether the speed is displayed in
kilometres or miles in the system settings.
3.6.4.7 Function display
The function display shows texts and readings.
Three different types of information are shown:
Journey information
System settings and data, and
System messages.
Journey information
Depending on the type of pedelec, the function
display may show up to seven journey information
items. The displayed journey information can be
switched.
Additional journey information
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Applies only to Pedelecs with eShift with manual
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Applies only to Pedelecs with eShift with NuVinci
H|Sync/ enviolo with Optimized H|Sync
The following additional functions are available on
the function display:
Applies only to Pedelecs with eShift with Rohloff
E-14 Speedhub 500/14
The following additional functions are available on
the function display:
Symbol Use
Pedalling frequency is too high, a higher gear is
recommended
Pedalling frequency is too low, a lower gear is
recommended
Table 35: Symbols of the gear recommendation function
Screen display Function
CLO C K Current time
MAX. SPEED Maximum speed reached since the
last RESET
AV G . S P E E D Average speed reached since the last
RESET
TR I P TIME Journey time since last RESET
RAN G E Estimated range of the available
battery charge
OD OM E T E R Display of the total distance travelled
(cannot be changed)
TRI P D I STANCE Distance travelled since the last
RESET
Table 36: Journey information
Screen display Change
AUT O : O N / AUTO: OFF This menu option indicates
whether the automatic mode is
switched on or off.
Table 37: Additional journey information
Screen display Change
GE AR The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 38: Additional journey information
Screen display Change
GE A R The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 39: Additional journey information
Screen display Change
± NUVINCI CADENCE /
± NUVINCI GEAR
The current gear shift is shown
on the display screen. The new
gear is shown briefly on the
screen each time it is changed.
The standard setting is
± NuVinci cadence.
Table 40: Changing the system settings
SCREEN DISPLAY Change
GE AR The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 41: Changing the system settings
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Cross Rider Evo - Bosch Intuvia 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Cross Rider Evo - Bosch Intuvia 2020 in the language / languages: English as an attachment in your email.

The manual is 18.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Cross Rider Evo - Bosch Intuvia 2020

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - German - 123 pages

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - Dutch - 126 pages

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - French - 129 pages

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - Italian - 128 pages

Bulls Cross Rider Evo - Bosch Intuvia 2020 User Manual - Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info