779864
41
Zoom out
Zoom in
Previous page
1/93
Next page
MY21B03 - 32_1.0_23.12.2020 40
Operation
3Detach high-pressure damper pump.
4Measure the distance between the crown and
the dust seal. This distance is total deflection of
the fork.
5Push a temporarily attached cable tie
downward against the dust seal.
6Put on your normal cycling clothing, including
luggage.
7Sit on the bicycle in your usual riding position
and support yourself against an object, such as
a wall or tree.
8Get off the bicycle without allowing it to deflect.
9Measure distance between the dust seal and
the cable tie.
This measurement is the sag. The
recommended value is between 15% (hard)
and 30% (soft) of the total fork deflection.
10 Increase or reduce air pressure until you have
reached the desired sag.
11 If the sag is correct, turn the air valve cap
clockwise.
12 If you are unable to achieve the required sag,
an internal adjustment may be needed.
Contact your specialist dealer.
6.4.6.3 Adjusting the Suntour rear frame
damper
Only applies to bicycles with this equipment
When adjusting the sag, ensure that the
compression adjuster is in an open position, i.e.
the lockout lever is in the OPEN position.
1Remove the valve cap from the air valve.
Attach a high-pressure damper pump. Adjust
the rear frame damper air pressure to the
rider's weight. Detach high-pressure damper
pump.
2Measure the distance between the air chamber
seal and the end of the rear frame damper.
This distance is the total rear frame damper
deflection.
3Put on your normal cycling clothing, including
luggage. Sit on the bicycle in your usual riding
position and support yourself against an
object, such as a wall or tree.
4Push the O-ring downwards against the air
chamber seal.
5Get off the bicycle without the suspension fork
deflecting.
Measure the distance between the air chamber
seal and the O-ring. This measurement is the
sag. The recommended value is between 25%
(hard) and 30% (soft) of the total rear frame
damper deflection.
6Increase or reduce the air pressure until you
have reached the desired sag.
If the sag is correct, fasten the valve cap onto
the valve.
Notice
If the air pressure in the rear frame damper is
exceeded or undershot, the damper can be
permanently damaged.
Do not exceed the maximum air pressure of
300 psi (20 bar).
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls 2021 in the language / languages: English as an attachment in your email.

The manual is 8.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls 2021

Bulls 2021 User Manual - German - 94 pages

Bulls 2021 User Manual - Dutch - 93 pages

Bulls 2021 User Manual - French - 94 pages

Bulls 2021 User Manual - Italian - 94 pages

Bulls 2021 User Manual - Spanish - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info