678328
103
Zoom out
Zoom in
Previous page
1/111
Next page
7 Press the Down Arrow key and select the SD card beginning from "UEFI:", then press the Enter key.
8 The recovery process proceeds automatically.
9 When the recovery process finishes, the TeraStation shuts down automatically.
10 Turn on the TeraStation. If it boots up properly, recovery is completed.
Errors on the LCD Panel
The unit indicates errors on the LCD panel. The LCD panel can help you troubleshoot problems. Refer to the
"Diagrams" section in chapter 1 to locate where the LCD panel is.
If an error occurs, the unit will beep. You can stop the beeping by pressing the mode button.
Error Messages
LCD Panel Corrective Action
RAID-6
ONE DRIVE DOWN
One hard drive failed. Check the LED in front for the defective drive. Refer to
the "Hard Drive Replacement Procedure" section in chapter 6 and replace
the failed drive with a new drive.
You can stop the beeping by pressing the mode button.
RAID-6
TWO DRIVE DOWN
Two hard drives failed. Check the LED in front for the defective drive. Refer
to the "Hard Drive Replacement Procedure" section in chapter 6 and replace
the failed drive with a new drive.
You can stop the beeping by pressing the mode button.
SYSTEM
DOWN
Three or more hard drives failed. Check the LED in front for the defective
drive. Refer to the "Hard Drive Replacement Procedure" section in chapter 6
and replace the failed drive with a new drive.
You can stop the beeping by pressing the mode button.
FAN STOP
NORMAL
The fan is stopped. If you continue to use the unit while the fan is stopped,
the temperature of the drive will increase and a malfunction may occur.
Turn off the unit and check if dust has accumulated on the fan. If removing
dust does not solve the problem, the fan may be broken. Contact Buffalo
technical support.
You can stop the beeping by pressing the mode button.
Code ROM Error
System Halted
Program ROM cannot be read. Shut off the unit, wait 10 seconds, then turn it
back on. If the error still remains, contact Buffalo technical support.
Work RAM Error
System Halted
A work memory error occurred on the array controller. Shut off the unit, wait
10 seconds, then turn it back on. If the error still remains, contact Buffalo
technical support.
102
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation WSH5000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation WSH5000 series in the language / languages: English as an attachment in your email.

The manual is 7,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buffalo TeraStation WSH5000 series

Buffalo TeraStation WSH5000 series User Manual - German - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info