678328
102
Zoom out
Zoom in
Previous page
1/111
Next page
Hard Drive Status Cannot Be Found
If the language settings are not the same for the following options, the hard drive status such as error,
resynchronizing, or degraded may not be detected correctly. Configure the same language for these options.
• Display language
• Welcome screen and system account
• System locale
LCD Panel Displays a Different IP Address
The IP address displayed when pressing the select button is for maintenance use only and this is not the IP address
of the TeraStation.
Resynchronization Regressed When TeraStation Was
Restarted While Resynchronizing
If you restart the TeraStation while resynchronizing, the resynchronization temporarily halts and will resume after
the reboot completes. The ones place digit of the progress display will be reset to "0".
For example, if rebooted when resynchronizing has proceeded to 15%, the progress status after restarting will be
10%.
TeraStation Does Not Boot
If Windows Storage Server is not functioning properly, perform recovery using the supplied SD card.
Notice When Recovering
• This recovery procedure erases the data on the drive C. Backing up regularly is highly recommended to avoid
losing your important data. The data on drive D will be kept.
• Do not connect the SD card to another TeraStation or your computer. The recovery process that involves using
the SD card is intended for this product only.
• If the storage pool is created on drive 1, delete the storage pool before running the recovery process.
• Remove all USB devices except for the supplied SD card, a card reader, a mouse, and keyboard before recovering.
When it's completed, you can connect them back to the TeraStation.
Recovering Windows Storage Server
1 Turn off the TeraStation.
2 Insert the SD card into the card reader (not included).
3 Connect a mouse, keyboard, and the card reader to the TeraStation using a USB 3.0 or 2.0 port.
4 Connect the monitor to the TeraStation using a HDMI or VGA port.
5 Press the power button to turn the TeraStation on.
6 Press the F11 key some times until the "Please select boot device:" is displayed. When it's displayed, stop
pressing F11. If it not displayed, repeat from the step 1.
101
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation WSH5000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation WSH5000 series in the language / languages: English as an attachment in your email.

The manual is 7,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buffalo TeraStation WSH5000 series

Buffalo TeraStation WSH5000 series User Manual - German - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info