509703
167
Zoom out
Zoom in
Previous page
1/200
Next page
Chapter 4 Web Admin interface
LinkStation User Manual 166
Name Descriptions
Firmware
Installation
Updating Firmware Clicking [Check For Update] will check for the latest rmware version.
If the installed rmware version is not the latest, click [Install Update] to
update the rmware.
Power Management
UPS Settings
Click [Modify Settings]
to change settings.
Synchronization
with UPS
[synchronize with UPS connected to this LinkStation]:
Select to synchronize the LinkStation with a UPS that is directly
connected.
[synchronize with UPS connected to other LinkStation on the
network]:
Select to synchronize the LinkStation with a UPS that is
connected to a dierent LinkStation on the same network.
[do not synchronize with UPS]:
Select if synchronizing to a UPS is not desired.
synchronized
source LinkStation
IP Address
If [synchronize with UPS connected to other LinkStation on the
network] is selected, enter the IP address of the LinkStation that
is directly connected to the UPS.
UPS Connection
Type
Select a connection method with UPS.
Note: [USB Port (APC Style)] or [USB Port (OMRON Style)] can be
only set when UPS manufactured by APC for USB connection is
connected.
LinkStation
behavior When
Power failure
Allows you to set the time until shutdown when the power
failure continues. Or, it can shut down when it detects "Battery
Low" from UPS.
Note: “Low Battery shutdown is only supported with UPSs that
are connected to the LinkStation via USB.
UPS Behavior After
LinkStation has shut
down
Specify whether or not to shut down the UPS after shutting
down the LinkStation.
SleepTimer
Click [Modify Settings]
to change settings.
Timer Interval Select Sleep Timer interval from [Disable], [Everyday], or [Specic
day of the week]. If selecting [Specic day of the week], specify
the day by clicking the check box of the day. Timer can be set
from 1 - 3.
Wake up at Specify a wake-up time for the LinkStation to recover from sleep
mode and resume its normal state. Times from 0:00 to 23:45 are
allowed.
Begin Sleep at Specify a time for the LinkStation to move from its normal
functionality to a standby state (“sleep mode”). Times from 0:00
to 27:45 are allowed.
Note: The wake-up time must be later than the beginning time.
167


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo NAS LinkStation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo NAS LinkStation in the language / languages: English as an attachment in your email.

The manual is 13,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info