509703

Buffalo NAS LinkStation Manual

166
Zoom out
Zoom in
Previous page
1/200
Next page
Chapter 4 Web Admin interface
LinkStation User Manual 165
Name Descriptions
Maintenance
Email
Notication
Click [Modify
Settings]
to change
settings.
Click [Send
Test Message]
to send a test
e-mail to the
e-mail address
which has
been set.
Notication Select whether using E-mail notication feature or not. Following
message is sent by using E-mail Notication.
Note: Mail Server displays the list of [POP before SMTP] (the method to
give the permission to use SMTP server by authenticating at specied
POP server before sending e-mail). If this is set, this feature cannot be
used.
SMTP Server
Address
Enter [SMTP Server Address] (Mail Server Address).
SMTP Port No. Enter [SMTP Port No.].
Authentication Type Select [Authentication Type] from [POP before SMTP], [LOGIN(SMTP-
AUTH)], and [CRAM-MD5(SMTP-AUTH/CRAM-MD5)].
POP3 Server
Address
Enter the [POP3 Server Address] (E-mail server address).
POP3 Port No. Enter [POP Port No.].
SSL/TLS When [LOGIN(SMTP-AUTH)] and [CRAM-MD5(SMTP-AUTH/CRAM-
MD5)] are selected for [Authentication Type], specify either using [SSL]
or [TLS].
Username Enter a user name that will be used for authentication.
Password Enter the password used to access with above user name.
Subject Specify the subject of the e-mail to be sent. Use only one-byte
characters, not two-byte characters.
Recipient(s) Enter the e-mail address of the receiver, and click [Add]. You can
register up to 5 e-mail addresses as receivers.
Report Select the contents to send in the e-mail notication.
• [
HDD Status Report]
Send the status other hard drive of the LinkStation on the specied
time on [HDD Status Sending Time].
• [Fan Failure]
Sent if a problem on the fan of the LinkStation.
• [Disk Error]
Sent when an error occurs on the drive.
• [Backup Complete]
When the backup job is completed
Sent if the backup of the LinkStation is completed.
Maintenance
Restart
LinkStation
Restart the
LinkStation
Click [Restart] to reboot the LinkStation.
Shutdown*
* LS-QVL
LinkStation
models only
Shutdown Click [Shutdown] to turn o the LinkStation.
• To turn the LinkStation back on, press the power button on the front
of the LinkStation.
• To prevent the corruption of data, check that there are no data
operations in progress before turning o the LinkStation.
… 166 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo NAS LinkStation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo NAS LinkStation in the language / languages: English as an attachment in your email.

The manual is 13,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info