697437
21
Zoom out
Zoom in
Previous page
1/52
Next page
4
Installation
Logano GE615 - Subject to technical modifications.
21
B Remove feed pipe and outer steam tube.
Fig. 25 Separate the boiler block
B Undo nuts on anchor rods and remove anchor rods.
B Separate the boiler block at the leak location by driving
(knocking) in flat wedges or chisels between the
sections at the points provided at the top and bottom
(Æ Fig. 25).
B You MUST use new nipples and new packing cord
when reassembling.
B Pull the boiler block together again using the boiler
compression tool.
B Repeat pressure test
4.10 Boiler water connections
Observe the following note regarding the boiler
connection to the pipework. This is important to ensure
trouble-free operation.
The weld neck flange (with welded-on pipe) is fitted to the
upper boiler hub if the return is connected at a later stage.
The weld neck flange and flat gasket are shown in Fig. 27.
B The flow connection flange is required for connecting
the flow at a later stage.
Fig. 26 Fitting a connection flange
1 Flow connection flange
2 Gasket
3 Upper boiler hub (return connection)
4 Gasket
5 Weld neck flange
NOTICE: System damage due to leaking
connections!
B Secure the supply pipes free of stress to
the boiler connections.
B Have the customer install a fill valve in the
heating system (return).
NOTICE: System damage caused by
deposits, local overheating, noise and
corrosion.
B Flush the existing heating system
thoroughly before the boiler is connected
to the pipework.
B We recommend you install a desludging
unit in the heating system return to prevent
boiler damage.
A boiler safety set is available on request.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logano GE615 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logano GE615 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logano GE615

Buderus Logano GE615 User Manual - German - 12 pages

Buderus Logano GE615 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info