697437
15
Zoom out
Zoom in
Previous page
1/52
Next page
4
Installation
Logano GE615 - Subject to technical modifications.
15
B Insert the flexible packing cord on the front of the rear
section, starting around the upper hub, into the packing
grooves, and press in lightly.
B At the butt joints, overlap the packing cord by approx.
2 cm and press firmly together.
B Do not allow the packing cord to overlap on the left- or
right-hand joints (Æ Fig. 12, [3]).
Fig. 12 Inserting packing cord (KM cord)
1 Packing grooves
2 Packing cord
3 Joints
Prepare the first central section (with the upper
flow connection):
B File down any burrs on the hub.
B The packing springs must be clean and dry. Clean if
necessary.
B Clean the hub sealing faces with a rag soaked in white
spirit.
Fig. 13 Preparing the centre section
1 Hub sealing face
2 Sealing springs
B Evenly coat the hub sealing faces with sealant.
B Coat the packing springs with adhesive (adhesive
base)
B Position the central section with the flow connection so
that the upper and lower hubs fit onto the nipples in the
rear section. The installation direction arrow must point
towards the back.
B Drive first central section onto the rear section using a
wooden or a rubber mallet.
Unroll the required length of packing cord
(KM cord) from the roll supplied. Peel the
backing paper from the packing cord when
inserting into the packing groove (do not
stretch).
CAUTION: Risk to health from vapours
released during the processing of materials,
such as adhesives, adhesive bases or
sealants.
B Observe processing and safety
instructions on the material packaging.
B Ensure good ventilation in the installation
area.
B Wear work gloves to avoid contact with
skin.
B The product and its container must be
treated as hazardous waste for disposal
purposes.
To make installation easier, place the boiler
section to be fitted onto the nipple on the
upper hub first. The boiler section can then
be adjusted accordingly on the lower hub.
Before the nipples are inserted in the next
central section, the part-assembled boiler
block must be pulled together using the
boiler compression tool.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logano GE615 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logano GE615 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logano GE615

Buderus Logano GE615 User Manual - German - 12 pages

Buderus Logano GE615 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info