636472

Buderus Logano G315 Manual

15
Zoom out
Zoom in
Previous page
1/56
Next page
7
Boiler block assembly
Logano G315 – 6 720 817 939 (2016/04) 15
The directional arrow ( Fig. 15, [3]) must point in the direction of the
rear boiler section.
▶ Position the intermediate section so that the upper and lower hubs
( Fig. 15, [2 and 4]) fit onto the nipples in the rear section.
▶ Pound first intermediate section onto the rear section using a
wooden or a rubber mallet ( Fig. 15, [1]).
Fig. 15 Pound intermediate section in place
Fig. 16 Boiler assembly tool 2.3
▶ Push the compression units (Fig. 17, [3 and 4]) onto the tie rods
(Fig. 4, [4], page 11).
▶ Push a tie rod through the upper and lower hubs on the boiler.
Fig. 17 Using the boiler assembly tool
▶ Push mating flanges (Fig. 18, [1]) onto the tie rods (Fig. 18, [3]) and
secure each with wedge (Fig. 18, [2]).
▶ Hold the tie rod in the center of the boiler hubs and slightly draw
together the assembly tools using the clamping nut.
Before the nipples are inserted in the next intermediate
section, the part-assembled boiler block must be
compressed using the boiler assembly tool.
NOTICE: The boiler can be damaged by pulling the boiler
sections together incorrectly or due to excessive
compression.
▶ Ensure that the nipples are positioned straight in the
boiler hubs after being pounded in and that they have
not been compromised.
▶ Never compress more than one nipple joint at a time.
▶ Stop compressing the sections when the boiler hubs
meet.
NOTICE: Assembly tool damage due to loose screw
connections of the tie rods.
▶ Always check the tie rods before each use and
retighten as necessary. The tie rod is correctly
positioned if it is fully inserted and no threads are
showing ( Fig. 16, [2]).
▶ Always keep the threads ( Fig. 16, [1]) clean.
Dirty threads may damage the assembly tool during
compression.
6 720 642 621-11.1o
2
3
4
1
CAUTION: Danger of accident from material fatigue.
Improperly used or poorly maintained assembly tools
may fail.
▶ Never work directly in front of the assembly tool
while it is being tensioned.
▶ Ensure that no one is standing in front of the
assembly tool.
NOTICE:
▶ Only boiler assembly tools size 2.3 may be used
(Fig. 4, page 11 and Fig. 17, [1 and 2]).
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logano G315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logano G315 in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logano G315

Buderus Logano G315 User Manual - English - 8 pages

Buderus Logano G315 Installation Guide - French - 56 pages

Buderus Logano G315 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info