560474
38
Zoom out
Zoom in
Previous page
1/100
Next page
38
We reserve the right to make any changes due to technical modifications!
Installation and Servicing Instructions Logamax plus GB142-24/30/45/60 • Version 12/2004
Buderus Hydronic Systems • http://www.buderus.net
BC10 basic controller10
1
(flashing)
< P3 Fault: system pressure is far too low (< 3 psi =
< 0.2 bar)
Fault
Burner and appliance circuit pump are not
operational. Frost protection is active up to
2 psi (0.1 bar).
The heating system will only become
operational again if the pressure is back to
14.5 psi (1.0 bar).
Fill the heating system and restore the
minimum filling pressure (t 14.5 psi =
t 1.0 bar).
The system pressure is shown for
10 minutes after which the standard
display returns.
number > 200
Error code
Remedy the error see servicing section
number
0 ... 199
Current heater water temperature (in °F)
< P3 Current system pressure (in psi)
1
(partially
flashing)
Combination
of letters and
digits
Service code Fault
Lock-out faults (flashing display) must be
reset by pressing the "Reset"
button.
Blocking faults reset automatically as soon
as the cause has been removed.
Remedy any blocking faults that remain
active for a long time using the service
section in this manual.
number > 200
Error code
Remedy the error using the servicing section in
this manual
number
0 ... 199
Current heater water temperature (in °F)
> P15 Current system pressure (in psi)
1
A00 ... A99 Service code System faults
System faults are faults in the heating
system that do not affect the burner
operation.
number > 800
Error code
Remedy the error using the service section in this
manual
number
0 ... 212
Current heater water temperature (in °F)
> P15 Current system pressure (in psi)
(flashing)
Fault
No communication between BC10 and automatic
gas burner.
Fault
Remedy the error using the service section
in this manual.
Check the connections to both devices.
Check the communication lines.
Displays
(examples)
Values Meaning Operating condition/Remedy
Table 9 Possible status displays
1
Standard display for this operating condition. This display appears after 5 minutes if no button is pressed.
3


3
$


3
$

+

3
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamax plus GB142-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamax plus GB142-45 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logamax plus GB142-45

Buderus Logamax plus GB142-45 User Manual - German - 16 pages

Buderus Logamax plus GB142-45 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info