697444
64
Zoom out
Zoom in
Previous page
1/84
Next page
Additional programming options
8
Logamatic 4321/4322 - Subject to technical modifications.
64
8.4 Creating a new DHW circulation pump program
You can operate the DHW circulation pump either according to the factory
settings "Program select. by heat. circs" or according to your own new switching
program "Program select. own CP".
If your circulation pump works independently of the heating circuits, you can
enter your own new DHW circulation pump program as follows:
Example:
The DHW circulation pump is to run on all weekdays from 06:30 to 09:00.
z Select a heating circuit (Æ Chapter 7.6).
(here: "DHW circulation")
z Select a program for the heating circuit "DHW circulation" (Æ Chapter 7.10).
(here: "Program select. new")
The display shows the blank screen "New switch.point" for the new switching
point.
z Enter the switching points (Æ Chapter 8.2).
Your DHW circulation pump will now operate according to your "Own
program CP". You can call up your new "Own program CP" by pressing
"Prog" and turning the rotary selector.
USER INFORMATION
With the factory setting "Program select. by heat. circs", the DHW circulation
pump starts automatically 30 minutes prior to the first switching point of all
heating circuits associated with this control unit, and ends when the last
heating circuit is switched off.
New switch.point
--------------
----
at ---
USER INFORMATION
Only after all three details (day/time/temperature) have been defined for the
new switching point will it be automatically saved under "Own program CP"
and the heating circuit number "DHW circulation". This saving is not shown on
the display. The display shows the blank screen "New switch.point" for the
next switching point. Repeat this process for all required switching points.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamatic 4322 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamatic 4322 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info