697444
63
Zoom out
Zoom in
Previous page
1/84
Next page
Additional programming options
8
Logamatic 4321/4322 - Subject to technical modifications.
63
8.3 Creating a new DHW program
You may operate DHW heating either according to the factory settings "Program
select. by heat. circs" or according to your own switching program "Program
select. own DHW".
If DHW is to be heated independently of the heating circuits, you can enter your
own new DHW program as follows:
Example:
On all weekdays DHW should be heated from 06.30 until 09.00.
z Select a heating circuit (Æ Chapter 7.6).
(here: "DHW")
z Select a program for the heating circuit "DHW" (Æ Chapter 7.10).
(here: "Program select. new")
The display shows the blank screen "New switch.point" for the new switching
point.
z Enter the switching points (Æ Chapter 8.2).
Your DHW heating will no operate according to your "Own program DHW".
You can call up your new "Own program DHW" by pressing "Prog" and turning
the rotary selector (Æ Chapter 7.6).
USER INFORMATION
With the factory setting "Program select. by heat. circs", DHW heating begins
30 minutes prior to the first switching point of all heating circuits associated with
this control unit, and ends when the last heating circuit is switched off.
New switch.point
--------------
----
at ---
USER INFORMATION
Only after all three details (day/time/temperature) have been defined for the
new switching point will it be automatically saved under "Own program DHW",
and the heating circuit selection "DHW". This saving is not shown on the
display. The display shows the blank screen "New switch.point" for the next
switching point. Repeat this process for all required switching points.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamatic 4322 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamatic 4322 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info