English - 15
English
Operation
4. Change the temperature as follows:
- Press and hold the TEMPERATURE key.
- Change the time using the program knob.
- Release the TEMPERATURE key.
You have now changed a switching point. After a few seconds, the
display shows the actual time and the measured room
temperature (normal mode).
Inserting an arbitrary switching point
If you want to have more switching points in your clock program,
do the following:
1. Make sure the display is in normal mode (refer to figure 3-2).
2. Select a switching point using the program knob.
3. Briefly press the INSERT key.
4. Press and hold the DAY key and select a day using the
program knob.
5. Release the DAY key.
6. Press and hold the TIME key and select a time using the
program knob.
7. Release the TIME key.
1..7
