630470
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
max
min. insertion
Insert seat post into seat tube. Adjust height of seat tube in accordance with user
height. The minimum insertion marker must never be visible above the seat tube.
To determine the correct seat height, sit on the bike and place your heel on the pedal
in the lowest position with the crank parallel to the seat post. The seat is the correct
height when your leg is fully extended.
- How to measure and adjust height of handlebars to suit user (see chart at end of instructions).
Insert stem into pivot tube. Adjust height of stem, depending on user
height, ensuring that you do not go beyond the minimum insertion
marker or as far as the stop.
Going beyond the minimum insertion marker constitutes product misuse
and may place the user in danger.
Headset stem:
All MTBs tted with aheadset stems are sold with setting rings.
The handlebar height suggested in the shop is the highest.
If you would prefer to raise the handlebar position, you will
need to choose a higher stem.
Adjusting aheadset stems on your bicycle:
To reduce the height you need to use appropriate tools (T-bars 5 or 6 depending on the model - see tools chapter).
- Completely unscrew screw A, then the two B screws in the stem.
- Remove the stem.
- Take 1 or more setting rings.
- Replace the stem.
- Replace the setting rings above the stem.
- Tighten up screw A and tighten the B screws.
Checking that aheadset stems are properly tted to your bicycle:
To check the adjustment of your stem, close the front brake and rock forwards and backwards on
your bicycle. If you feel any movement in the steering system, tighten up screw A.
Second check: lift the front of the bicycle o the ground and turn the handlebars from side to
side. If it's hard to turn the handlebars, unscrew the screw A. I
f this procedure seems too complex, please ask the sta in the workshop at your nearest shop.
- Brake adjustment and use
Before every ride, check that the front and back brakes are in perfect working order.
The front brake is controlled by the left brake lever (right brake lever in certain countries such as India, China and England).
The rear brake is controlled by the right brake lever (left brake lever in certain countries such as India, China and England).
The brakes are a key safety mechanism for the cyclist. They must be checked before every ride and regularly maintained and
adjusted.
You can adjust the brake system as follows:
Brake pads
1/Check the pad is aligned with the edge of the rim.
2/ Check the distance of the pads from the rim (1 to 3 mm for optimum braking).
3/ Always distance the rear of the pads slightly from the rim.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BTwin 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BTwin 2013 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info