650239
29
Zoom out
Zoom in
Previous page
1/35
Next page
28
On-Air 2100 SMS user guide ~ Edition 3 ~ 29th July ’02 ~ 4641
Generally this telephone may be connected to
switchboards which support tone signalling and
timed break recall. In the event of any difficulties
please consult your switchboard service provider.
Switchboard compatibility
Recall
This is of use when connected to
switchboards or using BT Select
Services. It is only available when a call
is in progress.
When you need to use recall during
a call:-
Press the button.
Press the button when
R
appears
above on the display.
To activate Recall
When connected to some switchboards/
PBX’s you may encounter higher than
normal speech levels. If this is the case
you can alter the network setting from
PSTN to PBX which will reduce the
levels to normal
Press the UP button to select
Base
.
Press OK.
Press the DOWN button to select
Base Settings
.
Press OK.
Press the DOWN button to select
Phone line
.
Press OK.
The display will show
Line type
.
Press OK.
Use the UP or DOWN button to select
either
Public
for PSTN or
Private
for
PBX.
Press OK to confirm.
To change the network connection
The BT On-Air 2100 SMS (with up to 6 handsets)
has a total REN of 1. Any other instrument
provided by BT may be assumed to have a REN
of 1 unless stated otherwise.
A total REN of 4 is allowed per telephone line.
(For example: if the BT On-Air 2100 SMS is
used in conjunction with three extension
telephones, each with a REN of 1, then the total
REN = 4)
Only use approved power supply item code
872101.
RTTE
This apparatus was designed in compliance with
European Council decision Number 98/482/EC
relative to pan-European connection in view to
its connection on the Public Switched
Telephone Network (PSTN). It is in conformity
with Standards TBR21, TBR38(*)ETSI 201 121.
(*) Terminals integrating an analogue handset function.
If problems arise, your supplier should be
contacted first.
The EC marking attests product conformity with
the essential requirements in compliance with
Directives 73/23/EC for User Safety, 89/336/EC
for Electromagnetic perturbations and 98/13/EC
for Telecommunication network access.
The manufacturer declares that the products
have been manufactured in conformity with
Annex III of RTTE Directive 99/05/EC.
Helpline
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0870 240 4682.
COK
COK
COK
COK
COK
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT On-Air 2100 SMS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT On-Air 2100 SMS in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info