On-Air 2100 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051
6
WARNING
Do not connect the telephone line cord to the
phone socket until your handset is fully charged.
This will prevent the risk of the phone being
answered before the battery is charged.
Answering the phone before the battery is fully
charged may prevent it from reaching its
optimum capacity.
2 Charge the battery in the
handset for at least 16 hours
WARNING
Under no circumstances should
non-rechargeable batteries be used. Only use
the approved batteries. Using unapproved
batteries will invalidate your guarantee and
may damage the telephone.
Under ideal conditions the battery should give
about 10 hours talk time and 120 hours
standby when the batteries have been fully
charged.
Fully discharging the batteries at least
once a week will help them to last as long as
possible. However, the charge capacity of
rechargeable batteries will reduce with time
as they wear out, so reducing the talk/standby
time of the handset. Eventually they will need
to be replaced. New batteries can be obtained
from the Helpline on 0870 240 4682.
When the battery has been charged for at least
16 hours the display will show the symbol;
you can then connect the telephone line cord to
the base.
Empty
1
/
3
2
/
3
Full
Battery performance
Your handset is supplied with NiMH
batteries. These need to be initially charged
continuously for 16 hours to reach full
charge.
Note that the battery charge icon does not
indicate the correct level when the batteries
are first installed. The batteries must first be
fully charged.
Battery low warning
If the handset battery symbol is empty and you
hear warning beeps, you will need to recharge
your handset before you can use it.
Helpline
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0870 240 4682.
Plug the power adaptor into the wall socket and
switch on. When the power is switched on, the
button on your base will light up.