At the connected telephone or fax
machine
• Lift the handset or press the
equivalent button on the fax machine.
• Now connect the Cordless Socket
to the mains power and switch on.
The base station beeps once.
• Press the 7 button on the keypad.
The Cordless Socket beeps once.
• Enter the base station number by
pressing 1 or 2 or 3 or 4. If you have
only one Diverse base station, press 1.
A single beep indicates this was
successful. If you hear four beeps,
try again.
• Enter the system code for your base
station. (Original setting = 0000.)
• Replace the handset or press the
equivalent button to hang up your fax
machine.
• Your phone or fax machine will now
ring.
Registration
You must register your Cordless Socket
with your Diverse base station, using
an attached telephone or fax machine.
Once registered you can begin to use
the telephone, fax machine or
answering machine connected to the
Diverse Cordless Socket.
To register a Cordless Socket using a
connected phone or fax
Make sure that the Cordless Socket is
switched off at the mains power socket
or is unplugged.
At the Diverse 2-Line base station
Connect a telephone or a fax machine
to the tel socket in the back of the
Diverse Cordless Socket. Use a pencil
tip (or similar) to press and release the
light/button so that it starts to flash. You
now have up to one minute to register
the Cordless Socket.
Using the Cordless Socket
with a Diverse 2-line Base
Station
