650120

BT Diverse 2010 Manual

32
Zoom out
Zoom in
Previous page
1/41
Next page
To set your handset for manual base
selection (with an automatic search
default)
This setting tells your handset to search
for a specific base signal for 30 seconds.
If the signal can not be found, the
handset reverts to automatic selection
of the base with the best signal. This
setting is recommended where there is
an overlap between two or three base
stations.
The handset must be switched ON.
• Press the STO button.
• Press the INT button. Display shows
the numbers of the base stations at
which the handset is registered.
• Press the number of the base (from
1 to 4) through which you wish to
make calls.
• Press the same number again. This
tells the handset to revert to
automatic search if the chosen base
is unavailable.
• Press STO to confirm.
If you move out of range from one base
station and into the range of another during
a call, you will lose your connection.
If your handset is taken out of range, switch
it off, move back into base station range,
and then switch on again. This will speed
up re-registration to the base signal.
If you do not wish to allow the handset to
revert to automatic signal selection press
the base station number just once. This will
mean that the handset can only operate
through the base you select.
STO
4
GHI
INT
1
The handset must be switched ON.
• Press the STO button.
• Press the INT button. Display shows
the numbers of the base stations at
which the handset is registered.
• Press the 0 button to set automatic
selection.
• Press the STO button to confirm.
The handset will now select the base
offering the strongest signal. Display
can show the base station selected
(see previous section ‘To set/clear the
base station number display’).
If you are in an area where base station
signals overlap it is best to specify the base/
telephone line you operate through. In this
case you change automatic base selection to
manual selection (with an automatic
search default), see opposite.
STO
INT
0
29
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Diverse 2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Diverse 2010 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info